Skip to content
Technician adjusting heating controls during a tune-up
Tune-ups and safety checks

Furnace maintenance in Toronto and the GTA

(647) 692-0819Open 24/7, day or night

Furnace maintenance in Toronto is a yearly tune-up and safety inspection: a TSSA-certified gas technician cleans, tests and adjusts the furnace, checks for carbon monoxide and gives you a written report. To book a furnace check-up with Assurance HVAC Heating & Cooling, call or send the request form, or put the furnace on our HVAC maintenance plan so the fall visit is scheduled for you. We service gas furnaces of every age and brand across Toronto and the GTA, from mid-efficiency units to modulating condensing models.

Request a technician

Tell us what’s going on. We’ll call to confirm a time.

What do you need?
How soon? Optional
Add email, details or text updatesOptional

Or call (647) 692-0819Used only to book your visit. Privacy

Key takeaways

  • Furnace tune-ups, check-ups and safety inspections across Toronto and the GTA, on all major brands.
  • Every visit is done by a TSSA-certified gas technician, WSIB covered and fully insured.
  • A part-by-part checklist, a carbon monoxide test and a written report, in about one to two hours.
  • You get a flat-rate price before work starts, and you approve any repair first.
  • Book in late summer or early fall, or let the maintenance plan schedule it for you.

Last updated . Written and reviewed by the Assurance HVAC Heating & Cooling service team.

On this page
  1. What furnace maintenance in Toronto includes
  2. Furnace check-up, tune-up, inspection or cleaning: what’s the difference?
  3. Furnace tune-up checklist: what we check, part by part
  4. How long does a furnace tune-up take, and what happens on the day?
  5. Do you need furnace maintenance every year?
  6. Furnace maintenance in Toronto: the best time to book
  7. How often should you change your furnace filter?
  8. Maintenance for high-efficiency furnaces
  9. Signs your furnace needs maintenance now
  10. What you can do between visits, and what needs a gas technician
  11. Furnace maintenance and carbon monoxide safety
  12. A one-time furnace tune-up or a maintenance plan?
  13. How much does furnace maintenance in Toronto cost?
  14. When a tune-up finds a bigger problem
  15. Furnace tune-ups across Toronto and the GTA
  16. Furnace maintenance questions

What furnace maintenance in Toronto includes

Furnace maintenance in Toronto covers three jobs in one visit: cleaning the parts that collect dust and soot, inspecting the parts that keep combustion gases out of your home, and testing that the furnace lights, heats and shuts off safely. The full checklist is below.

  • Cleaning: burners, flame sensor, blower and, on condensing furnaces, the condensate trap
  • Inspection: heat exchanger, venting, wiring and the gas connection
  • Testing: combustion, gas pressure, safety switches and carbon monoxide
  • Paperwork: a written report to keep with your warranty papers

Furnace check-up, tune-up, inspection or cleaning: what’s the difference?

In most Toronto homes these words describe the same visit. People book a furnace check-up, a furnace tune-up, a furnace inspection or an annual furnace service, and a proper visit covers all of it: cleaning, adjusting and safety testing.

What each name usually means, and what we do
NameWhat it usually meansOn our visit
Furnace check-upA yearly look before winterThe full checklist and a written report
Furnace tune-upCleaning and adjusting for efficiencyBurners, flame sensor and blower cleaned, combustion checked
Furnace inspectionA safety check of the heat exchanger, venting and controlsEvery safety switch tested, plus a CO test
Furnace cleaningRemoving dust and soot inside the cabinetBurners, blower and cabinet cleaned, condensate trap flushed
Annual furnace serviceAll of the above, once a yearThe same visit, booked yearly or through the plan

Furnace tune-up checklist: what we check, part by part

Our furnace tune-up follows the path the heat takes, from the thermostat’s call for heat through ignition, combustion and venting to the blower that moves warm air through your Toronto home. Every line below goes into your written report.

Furnace tune-up and inspection checklist
Part or systemWhat the technician does
ThermostatChecks the settings and the call for heat, then runs a full heating cycle
Furnace filterChecks the fit and condition, and notes the size you need
BurnersCleans off dust and rust, and checks for a steady, even flame
Igniter and flame sensorChecks the igniter for cracks or cleans an older pilot, and cleans the flame sensor
Heat exchangerInspects for cracks, rust and signs of overheating
Gas pressure and combustionMeasures gas pressure and combustion, and checks temperature rise against the rating plate
Gas connectionChecks the fittings and shut-off valve at the furnace for leaks
VentingChecks the flue, chimney connection or plastic pipes for blockages, sags and loose joints
Inducer and safety switchesTests the inducer motor, pressure switch, high limit and rollout switches
Blower and motorInspects the blower wheel and checks amp draw, the capacitor and any belt
Wiring and control boardChecks for heat-damaged wiring and reads any stored fault codes
Condensate and humidifierFlushes the condensate trap on condensing models and services any humidifier
Carbon monoxideTests for CO at the furnace and in the room around it

How long does a furnace tune-up take, and what happens on the day?

Most furnace tune-ups take about one to two hours. A condensing furnace, a humidifier or years of built-up dust puts a visit at the longer end. Here is how a visit to a Toronto home usually runs, from booking to the written report.

  • Book by phone or the request form, and we confirm a two-hour arrival window
  • A text lets you know the technician is on the way
  • The technician asks about noises, smells, cold rooms and the last service
  • They work through the checklist, then run a full heating cycle
  • You get a written report, and a flat-rate price for any repair to approve first

Do you need furnace maintenance every year?

Yes, once a year is the standard advice, ideally before the heating season. A yearly visit finds cracked heat exchangers, failing safety switches and blocked vents before they become a carbon monoxide risk, and catches tired parts in September instead of on a cold January night in Toronto.

  • Safety: combustion, venting and the heat exchanger checked by a licensed gas technician
  • Efficiency: clean burners and good airflow help the furnace reach its AFUE rating
  • Fewer breakdowns: dirty flame sensors and worn igniters cause many no-heat calls
  • Longer life: a gas furnace typically lasts 15 to 20 years, less if it runs hot

The TSSA (opens in a new tab), Ontario’s fuel safety regulator, advises a yearly inspection of every fuel-burning appliance by a TSSA-registered fuel contractor, and Enbridge Gas advises yearly inspections too, though no Ontario law requires it. Many manufacturer warranties also ask for proof of regular maintenance, so keep every tune-up report with your warranty papers.

Furnace maintenance in Toronto: the best time to book

The best time to book a furnace tune-up in Toronto is late summer or early fall, well before the first cold snap. A visit in August, September or early October leaves time to fit any part the technician finds, and you avoid the week when every furnace in the city starts up at once.

Toronto falls can swing from warm afternoons to near-freezing nights within days, and that first cold night is when hidden faults show up. A check-up also makes sense after a major repair or a dusty renovation.

How often should you change your furnace filter?

Change a standard 1-inch furnace filter every 1 to 3 months, and a thicker 4- or 5-inch media filter every 6 to 12 months. Pets, renovations and heavy dust push you toward the shorter end, especially through Toronto winters and humid summers, when the blower runs most.

Common furnace filter types and how often to change them
Filter typeTypical change intervalGood to know
Standard 1-inch pleatedEvery 1 to 3 monthsFills quickly in a busy household
4- or 5-inch media filterEvery 6 to 12 monthsSits in a cabinet beside the furnace and holds far more dust

A MERV 8 to 11 filter suits most furnaces, while a dense 1-inch MERV 13 can choke airflow. For allergies or wildfire smoke, a media cabinet or HEPA bypass from our indoor air quality team filters better.

Maintenance for high-efficiency furnaces

A condensing furnace, rated 90% AFUE or above, condenses water out of its exhaust, so it needs two extra checks: the condensate trap and drain, and the plastic intake and exhaust pipes outside. A clogged trap or a vent buried in snow will shut it down.

  • Condensate trap: flushed so sludge can’t back water into the furnace
  • Drain line and pump: checked for clogs, kinks and a working pump
  • Secondary heat exchanger: inspected, since it handles mildly acidic condensate
  • PVC vents: checked outside for nests, damage and blockages

Through a Toronto winter, brush snow and ice off those pipes by hand after heavy storms.

Signs your furnace needs maintenance now

Don’t wait for the yearly visit if the furnace already shows symptoms. New noises, a house that takes longer to warm up or rising gas bills point to a worn part, and catching it now usually means a simpler fix than a Toronto midwinter breakdown.

  • It’s been more than a year since the last service
  • A dusty or burning smell that lingers past the first day of heating
  • The burners light, then go out within seconds
  • Short bursts of heat that never settle into a long cycle
  • Water around the furnace

Soot around the furnace or vent, or a yellow, lazy flame, can mean poor combustion and carbon monoxide: turn the furnace off and call us. If a CO alarm sounds or anyone feels unwell, get everyone outside and call 911.

What you can do between visits, and what needs a gas technician

Between tune-ups, Toronto homeowners can look after the filter, the vents and the thermostat. Anything involving gas, combustion or the burner compartment belongs to a licensed gas technician, so never remove the burner cover or touch the gas valve or gas line yourself.

Who handles each furnace maintenance task
TaskWho does it
Check the filter monthly and change it when dirtyYou
Clear snow and ice off the outdoor intake and exhaust pipes by handYou
Keep supply registers and return grilles open and unblockedYou
Check the thermostat’s mode, setpoint and batteriesYou
Clean the burners and flame sensor, inspect the heat exchangerLicensed gas technician
Test combustion, gas pressure and safety switchesLicensed gas technician

Gas appliance work in Ontario is regulated by the TSSA, and ours is done by G2 and G1 certified gas technicians.

Furnace maintenance and carbon monoxide safety

A furnace that burns or vents poorly can put carbon monoxide into your home, and you can’t see or smell it. That’s why furnace maintenance in Toronto homes should always include a heat exchanger inspection, a venting check and a CO test, with working CO alarms as backup between visits.

Under Ontario’s Fire Code, any home with a fuel-burning appliance, a fireplace or an attached garage needs a CO alarm next to every sleeping area and, since January 1, 2026, on every storey as well. The province’s carbon monoxide safety page (opens in a new tab) has the details. If a CO alarm sounds, get everyone outside and call 911. If you smell gas, leave without touching light switches or using your phone inside, and call Enbridge Gas at 1-866-763-5427 from outside.

A one-time furnace tune-up or a maintenance plan?

A one-time furnace tune-up suits you if you’re happy to book it yourself each year. The maintenance plan handles it for you: a fall furnace tune-up and a spring AC tune-up, a reminder before each visit, priority booking in busy Toronto weeks and member pricing on repairs.

Both follow the same checklist and come with a written report, and we quote the plan around your equipment.

How much does furnace maintenance in Toronto cost?

What you pay for furnace maintenance in Toronto depends on the furnace type, its condition, the time since its last service and any add-ons. You get a flat-rate price before work starts, and any repair the inspection finds is priced separately for your approval.

What affects the cost of a furnace tune-up in Toronto
FactorWhy it changes the price
Furnace typeA condensing furnace adds a condensate trap, drain and plastic venting
Time since the last serviceA furnace skipped for years usually needs more cleaning
Add-on equipmentA humidifier, media filter or condensate pump adds parts and time
Number of furnacesHomes with two systems need two full checklists

When a tune-up finds a bigger problem

Sometimes a tune-up turns up more than dust: a cracked heat exchanger, a failing inducer motor, a worn igniter or a control board logging fault codes. The technician shows you the problem and quotes a flat-rate price for the furnace repair before anything is done.

A cracked heat exchanger means the furnace stays off until the part or the furnace is replaced, because it can leak carbon monoxide. On a furnace nearing 15 to 20 years, you see repair and replacement prices side by side, and our furnace installation team sizes any new unit with a heat-loss calculation. Repairs and installations carry our written workmanship warranty.

Furnace tune-ups across Toronto and the GTA

Toronto’s housing shapes how a furnace ages. In Leslieville’s century semis and the city’s row houses, the furnace often shares a tight basement room with the water heater and laundry, so lint gets into the blower and filter. In Etobicoke and Scarborough bungalows, a replacement furnace may still run on the original ductwork, so we check airflow too.

We also book furnace tune-ups in North York, Richmond Hill, Vaughan, Mississauga and Oakville, and our page for an HVAC contractor in Markham covers what we see in Unionville and Cornell.

FAQ

Furnace maintenance questions

Is a furnace check-up the same as a tune-up?

Usually, yes. Check-up, tune-up, inspection and annual service are names for the same yearly furnace visit. What matters is the scope: our technicians clean the burners and flame sensor, inspect the heat exchanger and venting, test every safety control, check for carbon monoxide and write up a report.

How long does a furnace tune-up take?

Plan on about one to two hours for most Toronto homes. Condensing furnaces take a little longer because the condensate trap, drain and plastic venting are checked too, as does a furnace that hasn’t been serviced in years. If a repair is needed, it’s priced first, and doing it the same visit adds time.

How often should a furnace be serviced?

Once a year for most homes, ideally in late summer or fall before Toronto’s heating season starts. That’s also what Ontario’s fuel safety regulator and Enbridge Gas advise for gas appliances. Between visits, check the filter monthly and change it when it’s dirty, and mention any repeated problems when you book.

Does Ontario require yearly furnace maintenance?

No. No Ontario law makes homeowners service a furnace every year, although the TSSA, the province’s fuel safety regulator, recommends a yearly inspection of fuel-burning appliances. What Ontario does regulate is carbon monoxide alarms, so make sure yours are where the Fire Code requires them. Your furnace warranty is a separate matter with its own terms.

Will skipping furnace maintenance void my warranty?

It can affect a claim, depending on the warranty. Many manufacturer warranties ask for proof of regular maintenance. Terms differ between makers and models, so read your warranty certificate or owner’s manual, and keep each written tune-up report with the furnace paperwork as your service history.

Is furnace cleaning the same as duct cleaning?

No. Furnace cleaning is part of a tune-up: the technician cleans the burners, flame sensor, blower and the inside of the cabinet, where dust and soot affect how the furnace runs. Duct cleaning is a separate job for the ductwork itself, and clean ducts don’t replace a tune-up.

Can I do my own furnace maintenance?

Some of it. You can change the furnace filter, clear snow from the outdoor vent pipes, keep registers and returns open and check the thermostat. Cleaning burners, inspecting the heat exchanger, testing combustion and anything touching the gas valve or gas line is work for a TSSA-certified gas technician.

What happens if the technician finds a cracked heat exchanger?

We show you the crack and explain the risk. A crack can let combustion gases, including carbon monoxide, mix with the air your ducts carry through the house, so the furnace stays off until the heat exchanger or the whole furnace is replaced. You get flat-rate prices for both options, and on an older furnace, replacement is usually the sensible choice.

Book a visit

Need furnace maintenance? We’ll call you back to book.

Send the form or call. You’ll get a confirmed arrival window and a price before any work starts.

(647) 692-0819

Open 24/7, with technicians out day or night for no-heat and no-cooling emergencies

Request a technician

Tell us what’s going on. We’ll call to confirm a time.

What do you need?
How soon? Optional
Add an email or detailsOptional

Or call (647) 692-0819Used only to book your visit. Privacy