Skip to content
Central air conditioner condenser behind a two-storey home
Homeowner guides

What size air conditioner do I need?

(647) 692-0819Open 24/7, day or night

What size air conditioner do I need is the question that decides whether a new system cools evenly or leaves the house clammy and warm. The right size comes from a room-by-room cooling load calculation, not from the old unit or the square footage of the home. This guide explains how sizing works, what goes wrong when it’s off and how it fits with AC installation.

Get an installation quote

Tell us about your home. We’ll call to book a quote visit.

What do you need?
How soon? Optional
Add email, details or text updatesOptional

Or call (647) 692-0819Used only to book your visit. Privacy

Key takeaways

  • Size comes from a cooling load calculation of your house, not from the old unit’s nameplate.
  • Too big short cycles and leaves the air damp. Too small runs constantly and still falls behind.
  • Insulation, windows, sun exposure, air leakage and ductwork all change the answer.
  • Residential air conditioners come in half-ton steps, and the load decides which step fits.
  • We size with a calculation and give a flat-rate price to approve before any work starts.

Last updated . Written and reviewed by the Assurance HVAC Heating & Cooling service team.

On this page
  1. What size air conditioner do I need? The short answer
  2. How air conditioner size is measured
  3. What size air conditioner do I need: the load calculation
  4. Why square footage and the old unit’s size mislead
  5. What happens when an air conditioner is too big
  6. What happens when an air conditioner is too small
  7. Signs your current air conditioner is the wrong size
  8. What size air conditioner do I need to match my furnace?
  9. Single-stage, two-stage and variable-speed
  10. A heat pump instead of an air conditioner
  11. What to ask before you buy a new air conditioner
  12. What size air conditioner do I need: common questions

What size air conditioner do I need? The short answer

The size you need is the one that matches your home’s cooling load, which is how much heat the house gains on a hot day. A calculation that looks at the walls, windows, attic, sun exposure and air leakage gives that number, and the AC is chosen to match it, no bigger and no smaller.

That is why two houses of the same square footage can need different systems, and why guessing from the old unit is risky.

How air conditioner size is measured

Air conditioner size is described in tons, a unit of cooling output. One ton is 12,000 BTU per hour, and residential central air conditioners come in half-ton steps. Output and the airflow of the furnace blower or air handler must match, because the cool air has to be moved through the ducts.

A bigger number is not a better one. The goal is a system that runs in long, steady cycles on a hot day, which keeps the temperature even and removes humidity as it goes.

What size air conditioner do I need: the load calculation

A load calculation is the proper way to answer the question. Canada’s standard method for it is CSA F280, which walks through each room of the house and adds up the heat coming in through every surface and opening. The result is a cooling load for the whole house and for each room.

Done well, it takes measurements and questions rather than a quick glance at the old unit. The aim is a number you can trust, and the system is then chosen to fit it.

  • Floor area, ceiling heights and the layout of each room
  • Insulation in the walls, attic and basement
  • The number, size and type of windows, and which way they face
  • Air leakage, shading from trees and neighbouring buildings
  • Ductwork size, condition and route
  • How many people live in the home and how it is used

Why square footage and the old unit’s size mislead

A square-foot rule of thumb treats every house the same, but a bungalow with a shaded lot and a two-storey home with big south-facing windows gain very different amounts of heat. The old unit’s size isn’t reliable either, because it may have been wrong from the start.

Houses also change after the AC was installed, with new windows, more attic insulation or an addition. That is why a replacement should be sized from scratch, and why a size quoted over the phone is only a guess.

What happens when an air conditioner is too big

An oversized air conditioner cools the air quickly and shuts off before the house has settled, then starts again soon after. That short cycling wears the compressor, and because the AC never runs long enough to remove moisture, the air feels cool but clammy.

Oversizing is common because a bigger unit sounds safer. It isn’t, since it costs more to buy and run, and it is less comfortable. Our guide to AC short cycling explains the symptoms.

What happens when an air conditioner is too small

An undersized air conditioner runs almost constantly on a hot day and still can’t pull the house down to the setpoint. The system works harder than it should, uses more electricity and wears out sooner, while some rooms stay warm through the afternoon.

Sometimes the real culprit is leaky ducts, a hot attic or poor insulation rather than the equipment. A technician can tell the difference, and sometimes a smaller improvement to the house is the smarter fix.

Signs your current air conditioner is the wrong size

The way an existing system behaves often hints at its size. The table below pairs common symptoms with the usual sizing explanation, though other faults, like dirty coils or a refrigerant leak, can look similar and need to be ruled out first.

Sizing clues from how the air conditioner behaves
What you noticeMight suggestWhat to check
Runs a few minutes, stops, repeatsToo bigLoad calculation, thermostat, airflow
Cool but clammy airToo bigRun time and humidity control
Runs nonstop and the house still warmsToo small, or poor ducts or insulationLoad calculation, duct leakage, attic
Some rooms always warmDuct or balance problem, not sizeAirflow and duct layout
Weak cooling with ice on the coilA fault, not a sizing problemFilter, airflow and refrigerant charge

What size air conditioner do I need to match my furnace?

In most GTA homes the air conditioner shares the furnace’s blower and ducts, so the new unit has to fit them. The indoor coil must be matched to the outdoor unit, the blower must move enough air for the size chosen and the ducts must carry it without too much resistance.

A mismatch costs efficiency and comfort even when the tonnage is right. Sometimes ductwork changes are needed, and a heat-loss calculation is also worth doing if a new furnace is coming. Our guide to what size furnace you need covers that side.

Single-stage, two-stage and variable-speed

Once the size is settled, the stage type decides how the AC delivers it. A single-stage unit is either on or off, a two-stage unit has a lower setting for mild days and a variable-speed unit adjusts its output continuously, which gives the steadiest temperatures and the best humidity control.

Efficiency is rated by SEER2, where higher numbers mean lower running costs. ENERGY STAR Canada (opens in a new tab) explains how to compare certified models. A multi-stage unit is also more forgiving of a house that sits between sizes.

A heat pump instead of an air conditioner

A heat pump is sized the same way, but it also has to meet the home’s heating needs, so the heat-loss calculation matters as much as the cooling one. A cold-climate model can cover much of a GTA winter, alone or with a furnace, and the right size depends on the house.

Rebate programs change, so we keep current information on our rebates page, and we don’t quote amounts. If you’re weighing it up, ask for both options in one visit.

What to ask before you buy a new air conditioner

A few questions separate a sized quote from a guess, and the first is simply what size air conditioner do I need and how was that worked out. Ask how the size was chosen, whether a load calculation was done and how the new unit matches your furnace and ducts. A contractor who answers clearly, with numbers from your own house, is doing it properly.

Our 313A-certified technicians handle sizing, refrigerant and installation, you see the flat-rate price before anything starts and the work carries our written workmanship warranty. If your current system needs attention first, see our AC repair page.

FAQ

What size air conditioner do I need: common questions

How do I know what size air conditioner my house needs?

A cooling load calculation, such as the CSA F280 method used in Canada, adds up the heat entering each room through walls, windows, the attic and air leaks. The AC is chosen to match that total. A size taken from the old unit or from square footage is only a guess.

Is a bigger air conditioner better?

No. An oversized unit cools quickly and shuts off before it removes humidity, so the air feels damp, and constant short cycling wears the compressor. It also costs more to buy and run. The right size runs in long, steady cycles that keep the house even and dry.

How many tons is a typical house air conditioner?

It varies widely with the house, so we don’t give a typical number. Residential units come in half-ton steps, and the load calculation picks one. Two homes of the same size can need different tonnage because of insulation, windows, sun and ductwork.

Can I just replace my AC with the same size?

You can, but it may not be right. The old unit could have been mis-sized, and the house may have changed since with new windows or added insulation. A fresh load calculation takes a short visit and avoids repeating a sizing mistake for another 12 to 15 years.

What size air conditioner do I need for a two-storey home?

It depends on the calculation, not on the number of floors. Two-storey homes often have an upstairs that runs warm because heat rises and duct runs are long. Sizing, duct design and airflow balance all matter, and a technician can look at each of them on a visit.

Does the furnace affect what AC size I can install?

Yes. The AC usually shares the furnace’s blower and ducts, so the blower has to move enough air for the size chosen. A mismatch hurts comfort and efficiency, which is why the indoor coil, blower and outdoor unit are matched at installation.

My AC is the wrong size. Can it be fixed?

Sometimes the symptoms can be eased by adjusting thermostat settings or airflow, or by choosing a multi-stage replacement. An oversized single-stage unit can’t be made smaller. If the fault is duct leakage or poor insulation, fixing that may help more than new equipment.

Can you size an air conditioner for my home in the GTA?

Yes. Our technicians assess homes in Toronto, North York, Richmond Hill, Vaughan, Markham, Mississauga and Oakville, and size the system from a load calculation. You get a flat-rate price to approve before any work starts, and we’re open 24/7 for no-cooling emergencies.

Book a visit

Planning a replacement? We’ll call you back to book a quote visit.

Send the form or call. You’ll get a confirmed arrival window and a price before any work starts.

(647) 692-0819

Open 24/7, with technicians out day or night for no-heat and no-cooling emergencies

Get an installation quote

Tell us about your home. We’ll call to book a quote visit.

What do you need?
How soon? Optional
Add an email or detailsOptional

Or call (647) 692-0819Used only to book your visit. Privacy