
AC not cooling is one of the most common summer calls, and the cause is often simple: a dirty filter, a tripped breaker or an outdoor unit buried in leaves. Sometimes it is a failed part or a refrigerant leak, and those need a licensed mechanic. This guide walks through the likely causes, the checks you can safely make and when to book AC repair across the GTA.
Key takeaways
- Start with the thermostat, the filter, the breakers and the outdoor unit, the simplest causes to rule out.
- Warm air with the outdoor unit silent points to a power, control or electrical-part problem at the outdoor unit.
- Ice on the indoor coil or copper lines means switching the AC off and leaving the fan on.
- Low refrigerant always means a leak, and only a 313A-certified mechanic should handle refrigerant.
- We give a flat-rate price to approve before any repair starts, and we’re open 24/7.
Last updated . Written and reviewed by the Assurance HVAC Heating & Cooling service team.
On this page
- What AC not cooling usually looks like
- AC not cooling: safe checks to make first
- Matching the symptom to the likely cause
- A clogged filter and poor airflow
- Outdoor unit problems that leave the air warm
- Ice on the coil or copper lines
- Low refrigerant means a leak, not a top-up
- Why AC not cooling gets worse in a heat wave
- Thermostat, duct and sizing problems
- AC not cooling: what a technician checks
- Keeping the cooling reliable all summer
- AC not cooling: common questions
What AC not cooling usually looks like
When people say their AC is not cooling, they usually mean one of three things. The air from the vents is warm, the air is only slightly cool and the house keeps climbing, or the system seems to run all day without reaching the setpoint. Each pattern points toward a different group of causes.
Noticing which kind of AC not cooling you have, and whether the outdoor unit is running, helps you and the technician narrow it down fast.
- Warm air from every vent, with the indoor fan running
- Slightly cool air and a house that never reaches the setpoint
- A system that runs constantly on hot afternoons but loses ground
- Cold air in some rooms and warm air in others
AC not cooling: safe checks to make first
Five quick checks rule out the simplest causes of AC not cooling, and none of them need tools. Work through them in order before you book a visit. Leave panels, wiring and refrigerant lines alone, since those belong to a licensed technician.
- Thermostat: set to Cool, with the setpoint a few degrees under room temperature, and new batteries if it takes them.
- Filter: if it looks grey and clogged, replace it with the size printed on the frame.
- Breakers: check the AC and furnace breakers, and reset a tripped one once. If it trips again, leave it off and call.
- Outdoor unit: look for leaves, cottonwood or grass clippings packed against it. Look at the disconnect box on the wall beside it, but don’t open it or pull anything out.
- Registers and returns: make sure supply registers are open and nothing covers a return grille.
If the air is still warm after those checks, the fault is deeper. Don’t keep running a system that is clearly struggling, because that can turn a small repair into a bigger one.
Matching the symptom to the likely cause
Most cooling problems fall into a handful of patterns, and the table below pairs each one with the usual cause and who handles it. It won’t replace a diagnosis, but it shows which causes you can rule out yourself and which ones need a technician with the right meters.
| What you notice | Likely cause | Who fixes it |
|---|---|---|
| Warm air, indoor fan running, outdoor unit silent | Tripped breaker, failed capacitor or contactor | You first (breaker), then a technician |
| Weak airflow and a slowly warming house | Clogged filter, closed registers or a dirty coil | You first (filter, registers) |
| Ice on the indoor coil or the thick copper line | Poor airflow or low refrigerant charge | Technician after thawing |
| Outdoor fan spins, air is lukewarm | Refrigerant leak or a weak compressor | Technician |
| Outdoor unit hums but the fan won’t turn | Failed run capacitor or fan motor | Technician |
| AC runs nonstop on hot days | Heat gain beyond what the system can remove | Technician |
A clogged filter and poor airflow
A dirty filter is the most common reason an air conditioner loses its cooling. Dust cuts the air moving across the indoor coil, so the coil can’t absorb heat properly, the house warms up, and in the worst case the coil freezes into a block of ice.
Replace the filter, open every supply register and clear the return grilles. Blocked airflow from closed registers or furniture can have the same effect, because the system was designed to move a fixed volume of air through the whole house.
Worth knowing: the same blower runs for heating and cooling, so a filter that is overdue in summer is usually overdue from winter too.
Outdoor unit problems that leave the air warm
The outdoor unit is where the heat leaves your house, so anything that stops it also stops the cooling. A tripped breaker, a switched-off disconnect, a failed capacitor, a bad contactor or a seized fan motor can all leave the indoor fan blowing warm air while the outdoor unit sits silent or only hums.
Look at the unit, but only from the outside. Switch the AC off at the thermostat, then brush leaves and grass off the fins by hand or with a soft brush, and keep about 60 cm of clearance all round. Never use a pressure washer or chemicals on the coil. If the unit hums without the fan turning, switch the AC off at the thermostat and call. Our guide on an AC outdoor unit not running covers that case in detail.
Ice on the coil or copper lines
Ice on the indoor coil or the larger copper line is a sign the coil is running below freezing, usually from poor airflow or a low refrigerant charge. A frozen coil can’t pass cool air, so the vents blow warm or barely any air, and the melting ice can later leak water around the furnace.
Switch the thermostat to Off and set the fan to On so room air thaws the ice. Don’t chip at it or scrape the coil. Once it has melted, a clean filter may be enough, but ice that returns means the charge or airflow needs a technician. Read more in our frozen AC coil guide.
Low refrigerant means a leak, not a top-up
Refrigerant circulates in a sealed loop and is never used up, so a system that has lost cooling power from low charge has a leak somewhere. Adding refrigerant without finding the leak only buys a short reprieve, and the cooling fades again as the charge escapes.
This is work for a 313A-certified mechanic. Refrigerant needs gauges, a leak search, proper recovery and the right charge by weight, and it is handled to code by licensed mechanics. There is no safe homeowner version of it, and do-it-yourself charging kits can damage a compressor.
Our technicians find the leak first, explain the repair options and give you a flat-rate price to approve. On an older system, the choice may be repair or replacement, which we cover in our guide to how long air conditioners last.
Why AC not cooling gets worse in a heat wave
A system that kept up in June can fall behind in a July heat wave, because every degree outdoors adds load to the house. A weak capacitor, a dirty outdoor coil, a partly iced indoor coil or a small refrigerant leak all show up first on the hottest afternoons.
If the AC holds steady overnight but loses ground in the afternoon, that is a clue worth passing on. Other causes include an undersized system, leaky ducts running through a hot attic and windows that take in strong afternoon sun. Closing blinds on the sunny side and avoiding a very low setpoint helps while you wait for a visit.
Thermostat, duct and sizing problems
Sometimes the AC works but the house still isn’t comfortable. A thermostat reading the wrong temperature, ducts that leak or were never balanced, and a system sized poorly for the house can all leave rooms warm even though cool air is being made.
Upstairs bedrooms are the classic complaint in two-storey homes, because heat rises and long duct runs lose cool air on the way. A technician can measure airflow and temperature drop to tell a duct problem from an equipment problem, and sizing is worth a look when a system has never cooled well. Our guide on what size air conditioner you need explains how that is worked out.
AC not cooling: what a technician checks
With AC not cooling, a technician works from the simplest causes to the hardest. They confirm the thermostat call for cooling, test the electrical parts at the outdoor unit, measure the temperature drop across the indoor coil and check airflow before they ever connect refrigerant gauges.
- Thermostat, breakers and the voltage reaching the outdoor unit
- Capacitors, contactor and the condenser fan motor
- Indoor coil, filter and blower for dirt or ice
- Refrigerant pressures and a leak search if the charge is low
- Condensate drain and drain pan
You approve a flat-rate price before work starts. Booked visits come with a two-hour arrival window and a text when the technician is on the way, and repairs carry our written workmanship warranty. We’re open 24/7, with technicians out day or night for no-cooling emergencies.
Keeping the cooling reliable all summer
Most no-cooling calls are avoidable with a little routine care. Change the filter on schedule, keep the outdoor unit clear of plants and debris, and start the AC for a test run in spring rather than on the first hot day, so any problem shows up while appointments are easy to get.
A yearly tune-up cleans the coils, tests the electrical parts and checks the charge. Our AC maintenance visit does that, and the maintenance plan includes two tune-ups a year, the AC each spring and the furnace each fall. The industry association HRAI (opens in a new tab) is a good place to learn more about the trade.
AC not cooling: common questions
Why is my AC running but not cooling the house?
With AC not cooling, the most common reasons are a clogged filter, a tripped breaker, a blocked outdoor unit, an iced indoor coil or a failed capacitor. Check the thermostat, filter and breakers first, and look for ice or debris. If the air stays warm, a technician needs to test the electrical parts and the refrigerant charge.
Can a dirty filter make an air conditioner blow warm air?
Yes, indirectly. A clogged filter starves the indoor coil of air, so it can’t absorb heat and may freeze over, and a frozen coil blows warm or weak air. Replace the filter, let any ice thaw with the fan running, and watch whether the cooling returns.
Is it safe to add refrigerant to my AC myself?
No. Refrigerant work needs gauges and recovery equipment, is handled to code by licensed mechanics, and is only ever low because of a leak. Topping it up without finding the leak wastes money and can harm the compressor. Leave refrigerant to a 313A-certified mechanic, who finds the leak first and quotes a flat-rate repair.
Why is my AC not blowing cold air when the outdoor unit is off?
With the outdoor unit silent, the indoor fan only moves room-temperature air. Check the thermostat and the breakers, and look at the disconnect box near the unit without opening it. If those are fine, a failed capacitor, contactor or safety switch is likely, and a technician should replace it rather than leave the system struggling.
How long should I wait before calling for AC repair?
If the checks above don’t restore cooling after an hour or so, or you see ice, hear grinding or smell burning, switch the AC off and call. Running a faulty system can damage the compressor, the most expensive part, so an early repair is usually the smaller one.
Will my AC cool better after a tune-up?
Often yes, if the loss came from dirty coils, weak electrical parts or low airflow, since a tune-up addresses all three. It can’t fix an undersized system or a major leak, but it catches many small problems before the first heat wave and keeps the system running closer to its rated output.
Could my house be too hot for the AC to keep up?
It can be. On the hottest afternoons a system sized close to the minimum, in a house with strong sun, a hot attic or leaky ducts, may hold the temperature rather than lower it. Closing blinds helps, and a technician can check whether the system, ducts or insulation is the limit.
Who repairs an AC that is not cooling in the GTA?
Our 313A-certified technicians repair central air conditioners across Toronto, North York, Richmond Hill, Vaughan, Markham, Mississauga and Oakville, on all major brands. Booked visits get a two-hour arrival window and a text, and you approve a flat-rate price before work begins. We’re open 24/7.
Still no cooling? We’ll call you back to book a technician.
Send the form or call. You’ll get a confirmed arrival window and a price before any work starts.
Open 24/7, with technicians out day or night for no-heat and no-cooling emergencies
