
Navien boiler repair is mostly a story about compact, wall-hung condensing units that heat the house and, in a combi, the tap water too. Assurance HVAC Heating & Cooling works on Navien boilers across Toronto and the GTA, and our TSSA-certified gas technicians diagnose first and quote after. See our wider boiler repair in Toronto service, or read on for what is specific to this brand.
Key takeaways
- Our technicians work on Navien combi and heat-only boilers across Toronto and the GTA.
- On a Navien combi, a fault can stop the hot water while the heating still works.
- Check your paperwork: Navien’s warranty page says online purchases void its warranty.
- TSSA-certified gas technicians do the work, and you approve a flat-rate price first.
- Open 24/7, with technicians out day or night when the heat is off.
Last updated . Written and reviewed by the Assurance HVAC Heating & Cooling service team.
On this page
- Navien in brief: the maker and its boiler lines
- Combi or heat-only: what you own changes the repair
- Navien boiler repair: what a wall-hung condensing unit changes
- Navien combi boiler no hot water: usual suspects
- Common Navien boiler repair jobs, from pumps to ignition
- Safe checks before you call about a Navien
- Navien boiler error codes: what E003 and the others mean
- Finding the serial number and registering your Navien
- Where you bought it can affect your warranty
- Navien boiler repair or replacement: which makes sense?
- Annual service keeps a condensing combi trouble-free
- Safety: gas smell, CO alarms and leaks
- How a repair visit works and how to book
- Navien boiler repair questions
Combi or heat-only: what you own changes the repair
A combi boiler makes space heating and domestic hot water from one burner and one condensing heat exchanger, so a single fault can take out both. A heat-only boiler does one job, and any hot water comes from a separate tank. Knowing which you have narrows the diagnosis quickly.
Navien states its NCB700 delivers space heating up to 150,000 BTU/h and domestic hot water up to 210,000 BTU/h, and its NFC-H pairs up to 199,900 BTU/h of space heating with 210,000 BTU/h of hot water. Those two outputs share one appliance, which is why hot water and heating complaints often travel together.
Navien boiler repair: what a wall-hung condensing unit changes
Navien says its combi boilers use condensing stainless steel heat exchangers and a compact, wall-hung design that takes less room than a floor-standing boiler and tank water heater. That design shapes how we work on them, because everything sits close together on a wall.
Condensing units pull heat from the exhaust, so they make acidic condensate that has to drain freely. Tight clearances also mean we plan vent runs, condensate routing and service access before we open anything up. A partly blocked drain is a simple cause of a lockout that looks serious.
Navien combi boiler no hot water: usual suspects
When a combi runs the radiators but gives lukewarm or no tap water, the fault is usually in the hot water side: a scaled plate heat exchanger, a flow sensor that is not reading, or a diverter that is not moving. We confirm which before replacing anything.
- Scale or sediment in the domestic hot water heat exchanger, common where water is hard
- A weak or blocked cold-water inlet filter that starves the unit of flow
- A diverter or flow component that has stuck or stopped reporting
- A mixing valve or fixture problem that makes a working unit seem faulty
- A recirculation loop or tempering setup that is fighting the boiler
On an NCB-H, a code such as E439 (no domestic water flow detected) points the technician to the hot water side, and the part is tested before any repair is quoted.
Safe checks before you call about a Navien
Three homeowner checks are safe and often useful: confirm the thermostat is calling for heat, make sure the boiler has power, and note what the front display shows. Then try the reset the maker describes, once, and not repeatedly.
Navien’s Canadian combi page says to reset by pressing the Back button, the back arrow, on the front panel. For other issues it points to the troubleshooting section of the user manual or Navien Technical Support. If the boiler locks out again, stop resetting and call us.
Navien boiler error codes: what E003 and the others mean
When something stops an NCB-H combi, the front panel shows an error code such as E003. The meanings below come from Navien’s NCB-H user’s manual (opens in a new tab), which covers the NCB-190/060H, 190/080H, 240/110H, 240/130H and 250/150H. The NCB700, NFC-H and heat-only models have their own manuals.
A code names what tripped, not why, so it tells a technician where to start testing.
| Code | What it means | What to do |
|---|---|---|
| E001 | Heat exchanger overheat | Reset once from the front panel; book a repair if it returns |
| E003 | Ignition failure | Make sure the main gas supply valve is open; call a technician if it repeats |
| E012 | Flame loss | Book a repair |
| E016 | Heat exchanger overheat | Turn the boiler off for at least 30 minutes, then restart it once |
| E030 | Exhaust overheat | Call a technician |
| E110 | Exhaust blockage | Check the exhaust vent outside is clear, then call a technician |
| E351 | Auto feeder valve fault | Call a technician |
| E352 | High water pressure | Call a technician |
| E353 | Water pressure sensor fault | Book a repair |
| E439 | No domestic hot water flow detected | Book a repair |
| E777 | Low water cutoff activated | Call a technician |
Note the code and whether the boiler was heating or making hot water. Our TSSA-certified gas technicians read it on site and test the part it points to before replacing anything.
Finding the serial number and registering your Navien
Navien’s warranty page says the serial number is on the outside right of the unit, between two barcodes, and is 15 to 16 digits long. Take a photo of it with the model name, since a repair history is much easier to keep with those two details on file.
The Navien site has a Register Product page at /register. Its Canadian registration rules are not spelled out on the pages we reviewed, so read the warranty page on Navien’s Canadian site (opens in a new tab) and keep your install paperwork with the serial number.
Where you bought it can affect your warranty
Navien’s warranty page states that consumer purchases through the internet or other e-commerce channels “shall void Navien’s warranty.” If you bought the boiler online, or are unsure how it was bought, check that wording before assuming any coverage applies.
We do not do warranty work on Navien’s behalf, and we are not in a position to say whether a claim would be accepted. What we can do is diagnose the fault, write down what failed, and give you a clear report to take to Navien or whoever supplied the boiler.
Annual service keeps a condensing combi trouble-free
A yearly service before the heating season catches the small problems that make a combi fail on a cold morning. The visit covers the burner, heat exchanger, condensate path, pressure, venting and the safety controls.
Our maintenance plan includes two tune-ups a year and priority booking. Navien’s own maintenance schedule is not covered on the pages we reviewed, so we follow the manual that came with your boiler.
Safety: gas smell, CO alarms and leaks
If you smell gas, leave the house and call Enbridge Gas at 1-866-763-5427 from outside. If a carbon monoxide alarm sounds, get everyone outside and call 911. Water from the relief valve, or a pressure gauge in the red, means shut the boiler off and call us right away.
Assurance HVAC Heating & Cooling is an independent HVAC contractor, not affiliated with or authorized by Navien. Brand names are trademarks of their owners.
Navien boiler repair questions
Why is my Navien combi boiler giving no hot water?
Common causes are scale in the hot water heat exchanger, a blocked cold-water inlet filter, or a flow or diverter component that has stuck. Heating can keep working while tap water fails. A technician tests each one so you pay to replace only the part that actually failed.
How do I reset my Navien boiler?
Navien’s Canadian combi page says to press the Back button, the back arrow, on the front panel. Try it once. If the fault returns, stop resetting, because repeated restarts can hide a real problem. The maker points to the user manual’s troubleshooting section or its Technical Support for anything else.
What does a Navien boiler error code mean?
It names the part or reading that stopped the boiler. On the NCB-H combi, Navien’s manual lists E003 as ignition failure, with the advice to make sure the main gas supply valve is open, and E012 as flame loss. The table above lists more. If a code returns after one reset, call us.
Does buying a Navien online affect the warranty?
Navien’s warranty page states that consumer purchases through the internet or other e-commerce channels shall void its warranty. Check how your boiler was bought and read Navien’s Canadian warranty page. We do not decide warranty claims, but we can document the fault in writing for you.
What is the difference between Navien combi and heat-only boilers?
A combi, such as the NCB700, NCB-H or NFC-H, heats the house and the tap water from one unit. A heat-only model, such as the NFB-H or NHB-H, handles space heating, and hot water comes from another source. The difference affects both diagnosis and what a replacement would involve.
Do you work on Navien boilers in Mississauga and Oakville?
Yes. Our technicians work on Navien boilers across Toronto and the GTA, including Mississauga, Oakville, Markham and Richmond Hill. Send the request form with the model name from the boiler’s label and the symptom, and we book the first available visit.
Is my Navien worth repairing?
Often yes. A condensing boiler can last 15 to 20 years with yearly service, so one failed part on a newer unit usually makes sense to repair. A heat exchanger leak or several worn parts on an older one is where replacement deserves a look.
What does a Navien repair visit cost?
It depends on the fault and the part. We diagnose first, then give you a flat-rate price for the repair before any work starts, and nothing proceeds until you approve it. If a replacement makes more sense, we show you both options side by side.
Need Navien boiler repair? We’ll call you back to book.
Send the form or call. You’ll get a confirmed arrival window and a price before any work starts.
Open 24/7, with technicians out day or night for no-heat and no-cooling emergencies
