Skip to content
Central air conditioner condenser behind a two-storey home
Homeowner guides

R-22 refrigerant phase-out: what it means

(647) 692-0819Open 24/7, day or night

R-22 refrigerant is no longer produced, and that matters if your air conditioner is old enough to still use it. A leak in an R-22 system is expensive to recharge, and on an older system the repair can cost more than the system is worth. This guide explains how to tell what your AC uses, what the phase-out means in practice and how to weigh AC repair against a replacement.

Get an installation quote

Tell us about your home. We’ll call to book a quote visit.

What do you need?
How soon? Optional
Add email, details or text updatesOptional

Or call (647) 692-0819Used only to book your visit. Privacy

Key takeaways

  • R-22 is no longer produced, so older systems rely on a shrinking supply of reclaimed refrigerant.
  • Check the rating plate on the outdoor unit to see which refrigerant your AC uses.
  • Refrigerant is never used up, so low charge always means a leak that needs repair.
  • Only a 313A-certified mechanic should handle refrigerant, and nothing should be vented.
  • We give repair and replacement prices side by side, and you approve before work starts.

Last updated . Written and reviewed by the Assurance HVAC Heating & Cooling service team.

On this page
  1. What R-22 refrigerant is and why it is being phased out
  2. How to tell if your AC uses R-22 refrigerant
  3. R-22, R-410A and the newer refrigerants compared
  4. Why low R-22 refrigerant always means a leak
  5. What drives the cost of R-22 refrigerant recharges
  6. Your options when an R-22 system leaks
  7. Age matters as much as the refrigerant
  8. What replacing an R-22 system involves
  9. Heat pumps as an alternative to a new AC
  10. What not to do with an R-22 air conditioner
  11. How we handle an R-22 service call
  12. R-22 refrigerant phase-out: common questions

What R-22 refrigerant is and why it is being phased out

R-22 is an ozone-depleting refrigerant that was the standard in residential air conditioners for decades. It is no longer produced, so the supply that remains comes from recovered and reclaimed stock rather than new production.

That doesn’t mean an R-22 air conditioner has to stop running, and many still do. It does mean one problem, a refrigerant leak, has become a much more serious one for the owner.

How to tell if your AC uses R-22 refrigerant

The quickest way to find out is to read the rating plate, the label on the outdoor unit. It lists the refrigerant type, usually as R-22 or R-410A, along with the model and serial number and the factory charge. You can read it without opening anything.

Age is a strong clue as well. A central AC that is 15 or more years old is likely to use R-22, and one from the last decade or so is not. If the label is faded or you can’t find it, a technician reads it on the first visit.

  • Find the rating plate on the side of the outdoor unit
  • Look for the refrigerant name next to “refrigerant” or “charge”
  • Note the model and serial number for the technician
  • Don’t remove panels to look for it, and don’t touch the copper lines

R-22, R-410A and the newer refrigerants compared

Residential air conditioners have moved through three generations of refrigerant. The table below summarises where each fits. They use different pressures and oils, so refrigerants are not interchangeable, and a system built for one can’t simply be topped up with another.

Refrigerants used in residential air conditioners
RefrigerantWhere you find itWhat it means for you
R-22Older air conditioners and heat pumpsNo longer produced; recharging uses a limited reclaimed supply
R-410AMost systems installed after R-22Still widely serviced, while new equipment moves to lower-GWP refrigerants
R-454B and R-32New equipment moving to lower-impact refrigerantsWhat a replacement system is likely to use

Why low R-22 refrigerant always means a leak

Refrigerant circulates in a sealed loop and isn’t consumed, so a system that has lost cooling power from low charge has a leak. The leak might be at a joint, a fitting or in the indoor or outdoor coil, and finding it is a job for gauges, leak detectors and experience.

Adding refrigerant without repairing the leak only buys a short reprieve, and with R-22 each top-up is costly. Our 313A-certified mechanics locate the leak first and explain the options, and they recover refrigerant properly rather than vent it. Our guide to AC not cooling covers the other causes of weak cooling.

What drives the cost of R-22 refrigerant recharges

Because R-22 is no longer produced, its price reflects a limited reclaimed supply, and a recharge costs far more than it would for a current refrigerant. We don’t quote a figure here, since it depends on the amount the system holds and the repair needed to stop the leak.

What you pay is a flat-rate price, approved by you before work starts. The question is whether to spend it on an older system. If the leak is in the coil or the system needs a large charge, the repair can come close to the cost of newer equipment.

Your options when an R-22 system leaks

There are three realistic paths when an R-22 system develops a leak, and the right one depends on the age and condition of the whole system, not just the leak. Ask the technician for the price of each so you can compare them.

  • Repair and recharge: reasonable for a small, accessible leak on an otherwise healthy system
  • Run it as is: not advised once cooling is lost, since the compressor suffers on a low charge
  • Replace the system: usually best for a coil leak, a failed compressor or a unit near the end of its life

Some owners ask about changing an R-22 system to a different refrigerant. Whether that is possible depends on the equipment and the maker’s guidance, so we don’t promise it, and we’ll tell you honestly if replacement is the better route.

Age matters as much as the refrigerant

A system that still uses R-22 refrigerant is old enough that other parts are near the end of their life: the compressor, the coil, the capacitors and the motors. Fixing the leak doesn’t renew those parts, so another failure can follow soon after.

Central air conditioners typically last 12 to 15 years, and an R-22 unit is usually at or beyond that. Our guide to how long air conditioners last explains how age, repairs and efficiency fit together in the decision.

What replacing an R-22 system involves

Replacing an R-22 system means a new outdoor unit and usually a matching indoor coil, because new refrigerants need a coil designed for them. The line set is also checked, and often replaced, since old lines may hold residue or be the wrong size.

The new system should be sized with a load calculation and matched to the furnace blower. A heat pump is an alternative worth pricing, since it cools and heats. See our AC installation page for how we plan a replacement.

Heat pumps as an alternative to a new AC

A heat pump cools in summer like an air conditioner and heats in winter, so replacing an R-22 AC is a natural point to compare. A cold-climate model can cover much of a GTA winter, alone or alongside your furnace, and the choice depends on your home and ductwork.

Rebates change and eligibility depends on the home, so we keep current information on our rebates page, and our guide there points to the official program. We don’t quote amounts, and we’ll tell you what applies when we assess the house.

What not to do with an R-22 air conditioner

A few shortcuts cause bigger problems. Don’t buy refrigerant or a charging kit online, don’t try to add any to the system and don’t disconnect lines or open the unit. Refrigerant is handled to code by licensed mechanics with gauges and recovery equipment, and the wrong type or amount damages the compressor.

  • Don’t add refrigerant or use a do-it-yourself charging kit
  • Don’t mix refrigerants, since each system is built for one
  • Don’t keep running a system that has stopped cooling
  • Don’t let anyone vent refrigerant to the air

If cooling fades or ice forms on the coil, switch the AC off and call. Our frozen AC coil guide explains the safe thaw.

How we handle an R-22 service call

The technician confirms the refrigerant on the rating plate, checks the system for the leak and the condition of the major parts, then gives you a flat-rate price for the repair and, where it makes sense, for replacement. You choose before any work starts.

Booked visits come with a two-hour arrival window and a text when the technician is on the way, repairs carry our written workmanship warranty and we’re open 24/7. ENERGY STAR Canada (opens in a new tab) is a handy reference for comparing efficient models.

FAQ

R-22 refrigerant phase-out: common questions

Is R-22 refrigerant still available?

R-22 is no longer produced, so what remains is recovered and reclaimed refrigerant. A technician can still service an R-22 system, but the supply is limited and recharging is costly. That is why a leak on an older system often leads to a replacement discussion.

How do I know whether my air conditioner uses R-22?

Read the rating plate on the outdoor unit. It lists the refrigerant, usually as R-22 or R-410A, with the model and serial number. A central AC that is 15 years old or more is a likely candidate. Don’t open the unit, and ask the technician if you can’t read the label.

Can I top up my R-22 air conditioner myself?

No. Refrigerant has to be handled to code by a 313A-certified mechanic with gauges and recovery equipment. A system is only low because of a leak, and topping it up without repairing the leak wastes the refrigerant and can damage the compressor.

Can R-410A be used in an R-22 system?

No. The two refrigerants work at different pressures and use different oils, so a system built for one can’t simply be topped up or switched to the other. Replacing the system, or a matched outdoor unit and coil, is the usual route to a newer refrigerant.

Do I have to replace my R-22 air conditioner?

Not if it still cools and has no leak. You can keep running it and service it each spring. The decision comes up when it leaks, needs a major part or is no longer reliable, and then comparing repair and replacement prices is the sensible step.

What refrigerant do new air conditioners use?

Many systems sold in recent years use R-410A, and new equipment is moving to lower-impact refrigerants such as R-454B and R-32. Your technician can tell you what a replacement system uses, what that means for future service and how its efficiency rating compares with your current unit.

Is a leaking R-22 AC dangerous?

It isn’t usually an immediate danger in a ventilated home, but it is bad for the system and the environment, and the AC stops cooling as the charge escapes. Switch it off and call a technician instead of running it, since a low charge also harms the compressor.

Who services R-22 air conditioners in the GTA?

Our 313A-certified technicians service and repair older air conditioners across Toronto, North York, Richmond Hill, Vaughan, Markham, Mississauga and Oakville, and handle refrigerant to code. Whatever the system needs, you approve a flat-rate price before work starts, repairs carry our written workmanship warranty and we’re open 24/7.

Book a visit

Planning a replacement? We’ll call you back to book a quote visit.

Send the form or call. You’ll get a confirmed arrival window and a price before any work starts.

(647) 692-0819

Open 24/7, with technicians out day or night for no-heat and no-cooling emergencies

Get an installation quote

Tell us about your home. We’ll call to book a quote visit.

What do you need?
How soon? Optional
Add an email or detailsOptional

Or call (647) 692-0819Used only to book your visit. Privacy