Skip to content
Outdoor heat pump unit beside a brick house
Homeowner guides

Cold-climate heat pumps: how they work

(647) 692-0819Open 24/7, day or night

Cold-climate heat pumps are built to keep heating when the temperature falls well below freezing, which is why they’ve become a serious option for Ontario homes. They differ from standard models in the compressor, the controls and the coil. This guide explains how they work, what to look for, and how sizing and backup heat decide the result. When you’re ready, see heat pump installation.

Get an installation quote

Tell us about your home. We’ll call to book a quote visit.

What do you need?
How soon? Optional
Add email, details or text updatesOptional

Or call (647) 692-0819Used only to book your visit. Privacy

Key takeaways

  • Cold-climate heat pumps are designed by their makers to keep heating well below freezing.
  • Variable-speed compressors and better controls are what set them apart.
  • Sizing and the home’s heat loss matter as much as the model.
  • Some homes still use backup heat for the coldest nights.
  • Rebates run through the Home Renovation Savings Program, and eligibility depends on the home.

Last updated . Written and reviewed by the Assurance HVAC Heating & Cooling service team.

On this page
  1. What cold-climate heat pumps are
  2. How cold-climate heat pumps keep heating in winter
  3. Standard heat pump vs a cold-climate model
  4. What to look for in cold-climate heat pumps
  5. Why sizing decides how a cold-climate heat pump performs
  6. Backup heat with a cold-climate heat pump
  7. Defrost, steam and noise in winter
  8. Ducted or ductless cold-climate models
  9. What installation involves
  10. Rebates for a cold-climate heat pump
  11. Maintaining a heat pump through winter
  12. When a cold-climate heat pump needs a repair call
  13. Cold-climate heat pumps: common questions

What cold-climate heat pumps are

These units are air-source heat pumps designed to keep delivering useful heat when the outdoor air is very cold. Makers build them with variable-speed compressors, improved refrigerant circuits and controls tuned for low temperatures. They work like any heat pump, moving heat from outdoor air into the house, but they hold their output further down.

They come as ducted systems that use your ducts, and as ductless mini-splits with wall-mounted heads. Both types can be cold-climate rated.

How cold-climate heat pumps keep heating in winter

Even freezing air holds heat, and a heat pump keeps pulling it out until the air is much colder than most people expect. The tricks are a compressor that speeds up when the demand rises, a coil and refrigerant circuit that work at low temperatures, and controls that manage defrost smoothly.

How low a given model keeps its capacity is something to read on the maker’s specification sheets, because it varies by make and size. We keep to the general principle here and leave figures to the maker. An installer can read that data against your heat-loss number, so you can see how much backup the home is likely to need on the coldest days.

Standard heat pump vs a cold-climate model

A standard heat pump loses output faster as it gets cold and leans on backup heat sooner. Cold-climate models hold more of their output at low temperatures, so they use less backup and keep the house comfortable on colder days. The table compares the main differences in general terms.

Standard and cold-climate models compared in general terms
FeatureStandard heat pumpCold-climate heat pump
CompressorOften single or two-stageTypically variable-speed
Heating in deep coldOutput falls soonerHolds more output as it gets colder
Backup heatUsed more oftenUsed less often, sometimes not at all
ComfortMore on and off cyclingLonger, gentler runs
Best fitMilder climates, supplemental useOntario winters, main heating

What to look for in cold-climate heat pumps

When comparing models, read the maker’s low-temperature capacity data, not only the headline efficiency. Check the heating and cooling ratings, the type of compressor, the defrost design and the warranty terms, and ask your installer for a model that suits the home’s heat loss.

  • A variable-speed compressor, which adjusts output to the day’s demand
  • The maker’s published heating capacity at low outdoor temperatures
  • HSPF2 for heating and SEER2 for cooling efficiency
  • A defrost design that avoids long gaps without heat
  • Quiet outdoor operation and a stand that keeps the unit above snow
  • A model on the ENERGY STAR Canada list, where that applies

ENERGY STAR Canada (opens in a new tab) is a good place to read about efficient models.

Why sizing decides how a cold-climate heat pump performs

A cold-climate heat pump only performs if it’s sized to the home. A room-by-room heat-loss calculation, which in Canada follows CSA F280, shows how much heat the house loses on a design cold day. The model is then chosen so its output at low temperatures covers that loss, not by copying the old furnace’s size.

Too small and it leans on backup. Too big and it costs more upfront and cycles more than it should. Our installers use the calculation, not a square-foot rule.

Backup heat with a cold-climate heat pump

Many homes pair a cold-climate heat pump with backup for the coldest stretches. Backup can be electric heating elements in the air handler, or a gas furnace in a dual-fuel setup that switches over below a set outdoor temperature. Some well-sealed homes run with little or no backup.

Our dual-fuel heat pump guide explains the switchover. Whichever backup you choose, a good installer sets the controls so it only runs when needed.

Defrost, steam and noise in winter

A cold-climate model still defrosts in winter, and that’s normal. You may see steam, hear a brief whoosh and notice the outdoor fan pause, with cooler air at the vents for a few minutes. A well-set system keeps these cycles short and spaced apart.

Our heat pump defrost mode guide covers what normal looks like, and heat pump frozen covers ice that doesn’t clear.

Ducted or ductless cold-climate models

Ducted models use the home’s existing ducts and heat every room through the registers. Ductless mini-splits mount a head on a wall in each zone, so they suit additions, homes without ducts and rooms the main system struggles to reach. Both can be rated for cold weather. Ask the installer which type fits the layout and the rooms that are hardest to heat.

Each has trade-offs for airflow, appearance and backup. Ductless systems usually have no backup heat of their own, which matters on the coldest nights.

What installation involves

Installation starts with the heat-loss calculation, a look at the ducts and a check of the electrical panel. The outdoor unit goes on a pad or wall bracket raised above snow, line sets and a drain path are run, controls and backup are set up, and the system is commissioned with the refrigerant charge verified.

Refrigerant is handled to code by certified technicians, and the installer explains the controls, the defrost behaviour and what a normal winter day sounds like. Once it is running, a short walk-through shows where to set the thermostat and what the backup indicator means. See our heat pump repair in Oakville page for what we repair after installation.

Rebates for a cold-climate heat pump

Ontario’s Home Renovation Savings Program, delivered through Save on Energy and Enbridge Gas, supports eligible heat pump upgrades. Eligibility and amounts depend on the home and its current heating fuel, and programs change, so we don’t quote figures. Our rebates page links the official program page.

Confirm eligibility and what the model must meet before you buy.

Maintaining a heat pump through winter

A little routine care keeps a cold-climate unit performing. Change filters on schedule, keep the outdoor unit clear of snow and leaves, make sure melt water can drain away, and book a yearly tune-up that tests the defrost controls and the refrigerant charge.

Our maintenance plan includes two tune-ups a year, and repairs are covered by our written workmanship warranty.

When a cold-climate heat pump needs a repair call

Even the best heat pump needs service sometimes. Call when ice won’t clear, the air stays cold, the backup runs all the time, or you hear grinding or banging. A technician finds the cause before adding any refrigerant.

Start with our heat pump repair page, and note that we’re open 24/7 when a cold night leaves you without heat.

FAQ

Cold-climate heat pumps: common questions

What is a cold-climate heat pump?

It’s an air-source heat pump designed by its maker to keep heating when the outdoor temperature is well below freezing. It typically uses a variable-speed compressor and controls tuned for cold weather, and can be ducted or a ductless mini-split. Always read the maker’s low-temperature data for a specific model.

Does a cold-climate heat pump work in Ontario winters?

Makers design them to keep heating through cold winters, and many Ontario homes use them. Results depend on sizing, insulation and ducts, and some homes keep backup heat for the coldest nights. A room-by-room heat-loss calculation shows what your home needs.

Do I need backup heat with a cold-climate heat pump?

Not always. Well-sealed homes with a properly sized unit may need little or none, while others use electric elements or a gas furnace for the coldest stretches. Ductless mini-splits usually have no backup of their own, so your installer should plan for the worst nights.

How is a cold-climate heat pump different from a regular one?

Cold-climate models hold more of their heating output at low outdoor temperatures. They typically use variable-speed compressors, refined refrigerant circuits and low-temperature controls, so they rely less on backup. A regular heat pump loses output sooner as the weather turns cold.

Does a cold-climate heat pump still go into defrost?

Yes. Every air-source heat pump collects frost in damp cold and clears it with a defrost cycle, so you’ll see steam, hear a short whoosh and feel cool air briefly. Short cycles are normal. Ice that stays on the coil means a fault and needs a technician.

Is a ductless mini-split a cold-climate heat pump?

It can be. Many mini-splits are rated for cold weather, but not all. Check the maker’s low-temperature capacity data for the exact model. Mini-splits also usually have no backup heat, so make sure the model suits the room’s coldest-day heat loss.

How long does a cold-climate heat pump last?

A heat pump commonly lasts about 15 years, and cold-climate models are no different. Regular filter changes, yearly tune-ups, a clear outdoor unit and prompt repairs help it reach that range, while neglected units wear out sooner because a heat pump works year-round.

Who installs a cold-climate heat pump in the GTA?

Assurance HVAC Heating & Cooling sizes, installs and repairs heat pumps across Toronto, North York, Richmond Hill, Vaughan, Markham, Mississauga and Oakville. Installations start with a heat-loss calculation, refrigerant is handled to code, and you approve a flat-rate price before work starts.

Book a visit

Planning a replacement? We’ll call you back to book a quote visit.

Send the form or call. You’ll get a confirmed arrival window and a price before any work starts.

(647) 692-0819

Open 24/7, with technicians out day or night for no-heat and no-cooling emergencies

Get an installation quote

Tell us about your home. We’ll call to book a quote visit.

What do you need?
How soon? Optional
Add an email or detailsOptional

Or call (647) 692-0819Used only to book your visit. Privacy