Skip to content
Outdoor heat pump unit beside a brick house
Assurance HVAC Heating & Cooling of North York

Heat pump installation in North York

(647) 584-3959Open 24/7, day or night

Assurance HVAC Heating & Cooling of North York handles heat pump installation in North York for both halves of the local housing stock: the 1950s and 60s bungalows and backsplits of Don Mills, Bathurst Manor and Willowdale, and the large custom homes that replaced their neighbours in York Mills and Bayview Village. We size each cold-climate or ductless system room by room, check the panel and ducts, and quote one flat price before work starts. Our HVAC contractor in North York page covers the rest of what we do here.

Get an installation quote

Tell us about your home. We’ll call to book a quote visit.

What do you need?
How soon? Optional
Add email, details or text updatesOptional

Or call (647) 584-3959Used only to book your visit. Privacy

Key takeaways

  • Ducted and ductless heat pumps for North York bungalows, custom rebuilds, basement suites and condos.
  • Every system is sized from a room-by-room heat-loss calculation, with ducts and panel checked first.
  • Refrigerant work by 313A-certified mechanics, WSIB covered and fully insured.
  • One flat-rate price approved before work starts, backed by a written workmanship warranty.
  • Help with Home Renovation Savings Program eligibility; book the home visit by phone or form.

Last updated . Written and reviewed by the Assurance HVAC Heating & Cooling of North York service team.

On this page
  1. Heat pump installation in North York: heating and cooling from one system
  2. Post-war bungalows and backsplits: a simple place to start
  3. Large custom homes in York Mills, Hogg’s Hollow and Armour Heights
  4. Ducted heat pump or ductless mini-split for a North York home?
  5. Ductless heat for basement apartments, sunrooms and additions
  6. How cold-climate models handle a North York January
  7. Heat pump installation in North York starts with a room-by-room heat-loss calculation
  8. Keeping your furnace: dual-fuel setups and the electrical panel
  9. SEER2, HSPF2 and what the ratings say about running costs
  10. Heat pump rebates in Ontario for North York homeowners
  11. What heat pump installation in North York looks like on the day
  12. Heat pump repair and maintenance after the install
  13. What affects the cost of a heat pump in North York?
  14. Heat pump installation questions from North York homeowners

Heat pump installation in North York: heating and cooling from one system

A heat pump is a central air conditioner that can also run in reverse. In summer it carries heat out of the house, and in winter it pulls heat from the outdoor air, even well below freezing, and moves it indoors. Because it moves heat instead of burning fuel, it delivers more heat than the electricity it uses.

Most North York homes already have a gas furnace and central air, so the question usually comes up when the AC fails or a renovation is planned. A heat pump can take over the cooling and much of the heating on the existing ducts, or serve one floor of a custom rebuild beside the furnace.

Post-war bungalows and backsplits: a simple place to start

A single-storey bungalow is one of the easiest homes to move onto a heat pump. Duct runs are short and the heat loss is modest next to a large two-storey house, so a cold-climate heat pump on the existing ducts can often carry most of the winter by itself.

The ductwork decides how well it works. Bungalows in Don Mills, Bathurst Manor, Lawrence Manor and Parkwoods went up with small return paths, and many basements have since been finished over them. Heat pump air comes out warm rather than hot, so steady airflow matters, and we measure static pressure before choosing a size. In backsplits, one ductless head on the bedroom level often evens out the floors.

Large custom homes in York Mills, Hogg’s Hollow and Armour Heights

In the big North York rebuilds, a heat pump is usually one part of a larger plan. Two-storey foyers, walls of glass and several floors on one thermostat already strain a single furnace and air conditioner, so we compare one heat pump, two, or a heat pump for the upper floor beside the existing system.

Where a home already has a second system for the bedroom floor, swapping that air conditioner for a heat pump when it fails is a sensible first step.

Ducted heat pump or ductless mini-split for a North York home?

Go ducted when the house has a furnace and ducts that can carry the airflow, and ductless when a space has no ducts, sits beyond their reach or needs its own control. Plenty of local homes end up with both: a ducted heat pump for the main house and a ductless mini-split head or two where the ducts fall short.

Ducted and ductless heat pumps in North York homes
QuestionDucted heat pumpDuctless mini-split
Where it fitsBungalows and two-storeys with a furnace and working ductsBasement apartments, sunrooms, rooms over the garage, boiler homes
What goes insideA coil on the furnace, or an air handlerSlim heads high on a wall, in the ceiling or low on the floor
ControlOne thermostat unless zoning is addedEvery head keeps its own setpoint
What we check firstReturn air, static pressure and duct sizeWall routes for the line set and drain

Ductless heat for basement apartments, sunrooms and additions

A ductless mini-split is the tidiest way to give a North York basement apartment its own heating, cooling and thermostat without cutting into a finished ceiling. One outdoor unit can serve one head or several, and each runs independently, so the tenant’s comfort doesn’t hinge on the upstairs thermostat.

We size each head to that space’s own heat loss and run the lines and drain inside a wall or a neat exterior cover. The same approach suits a sunroom or a third floor the original ducts never reached. If the suite is part of a renovation, call before the drywall goes up.

How cold-climate models handle a North York January

A cold-climate heat pump keeps producing useful heat into the minus 20s, though its output falls as the air gets colder. That is why sizing matters: a unit chosen for a mild day can fall behind on the coldest nights, while one sized for the design temperature covers far more of the season.

Inverter-driven compressors speed up as the temperature drops, so expect long, quiet cycles and air at the registers that feels warm rather than hot. Vapour from the outdoor unit during a defrost cycle is normal. We set it on a raised stand or bracket above the snow line, with room for meltwater to drain.

Heat pump installation in North York starts with a room-by-room heat-loss calculation

We size every heat pump from a room-by-room heat-loss calculation, not from the old air conditioner’s tonnage or the home’s square footage. It uses each room’s walls, windows, insulation and air leakage to estimate the loss on a design-cold night, which sets the capacity and shows how the air should be split.

A unit matched to a bungalow’s summer cooling load can be too small to heat it, and one sized by rule of thumb in a large rebuild can be oversized for most of the year. The room numbers also show where a ductless head beats a longer duct run.

Keeping your furnace: dual-fuel setups and the electrical panel

A dual-fuel heat pump works with your gas furnace. The heat pump handles the cooling and most of the heating, and when the outdoor temperature falls past a set changeover point, the controls switch to the furnace. If your furnace is in good shape it stays; if it is near the end of its life, we price both together.

The changeover point depends on capacity, heat loss and current gas and hydro rates, and it can be adjusted later. If the furnace needs replacing too, our page on furnace installation in North York explains how we size one.

Panel capacity in older bungalows

A heat pump needs its own dedicated circuit. Some older North York bungalows still have small or crowded panels, especially where a basement apartment added a second kitchen, so we look at the panel on the first visit and tell you before quoting if more capacity is needed.

SEER2, HSPF2 and what the ratings say about running costs

HSPF2 rates a heat pump’s heating efficiency over a season and SEER2 rates its cooling efficiency, and higher numbers mean less electricity for the same comfort. In North York’s climate the heating figure usually matters more, along with how much capacity a model keeps at low temperatures, which the spec sheet lists separately.

Use ratings to compare models rather than to predict a bill. For models carrying the label, ENERGY STAR Canada (opens in a new tab) explains what it means.

Heat pump rebates in Ontario for North York homeowners

The Home Renovation Savings Program, run by Save on Energy and Enbridge Gas, is the heat pump rebate open in Ontario right now. The heat pump has to be on the program’s eligible list, and what a household can receive depends on the home and the fuel it heats with today, so we never quote a rebate figure.

The Canada Greener Homes Grant and the Enbridge Home Efficiency Rebate have closed, so older articles that mention them are out of date. Before heat pump installation in North York goes ahead, we confirm the model is eligible. See the Home Renovation Savings Program (opens in a new tab) for current rules, and our heat pump rebates page for how we help.

What heat pump installation in North York looks like on the day

Replacing a central air conditioner with a ducted heat pump is similar in scope to an AC swap, while a multi-head ductless system, duct changes or electrical work take longer, and the quote includes the expected timeline. On the day, the crew follows the same order every time, finishing with a full test in heating and cooling.

  • Floors covered, power off, and refrigerant in the old condenser recovered to code
  • Outdoor unit set level on a raised stand or wall bracket
  • A new coil on the furnace, an air handler, or ductless heads mounted and wired
  • Line set brazed, pressure tested with nitrogen and evacuated before the refrigerant is released
  • Thermostat or dual-fuel controls set up, and both modes run under load

We handle the permits and inspections the job needs, and show you the thermostat, the defrost cycle and the filters before we leave.

Heat pump repair and maintenance after the install

Because it heats as well as cools, a heat pump runs for most of the year and is worth a yearly check. A tune-up washes the outdoor coil, cleans ductless filters, measures refrigerant pressures, tightens electrical connections, runs a defrost test and flushes the drains, so the system keeps the efficiency you paid for.

Common heat pump repair calls in North York include a sticking reversing valve that leaves the house cool in heating mode, a defrost sensor that lets ice build up, a worn capacitor and a ductless head dripping from a blocked drain. A 313A-certified mechanic finds the fault and prices it before any repair.

Our maintenance plan includes two tune-ups a year and priority booking, which suits a dual-fuel home where the furnace and heat pump both need attention.

What affects the cost of a heat pump in North York?

Heat pump cost depends on the type of system, its capacity, how many ductless heads you need, and any work the ducts or electrical panel need first. After the home visit you get one flat-rate price for the whole job, and it doesn’t change once work starts.

What changes the price of a heat pump job
FactorHow it affects the job
Ducted or ductlessEach ductless head adds equipment and a line set; a ducted unit reuses the duct system.
CapacityThe heat-loss numbers set the size, and a large rebuild needs more than a bungalow.
Ducts and returnsA new return or a resized run in a finished basement adds work.
ElectricalA small or full panel may need more capacity before the circuit goes in.

If your North York home qualifies for a rebate, you apply after the install, using the invoice and model details we provide.

FAQ

Heat pump installation questions from North York homeowners

Can a heat pump heat a North York bungalow through the whole winter?

Often it can carry most of it. A bungalow’s heat loss is modest, so a cold-climate ducted unit sized from a heat-loss calculation covers the bulk of the season. On the coldest nights, a dual-fuel setup hands off to the gas furnace, or electric backup takes over in an all-electric design.

Will a heat pump work on the original ducts in a Don Mills or Parkwoods home?

Usually, with some checks. Post-war ducts often have small returns, especially once the basement was finished, and heat pumps need steady airflow. We measure static pressure first. Sometimes the fix is a new return or a resized run; sometimes a ducted unit plus a ductless head works better than forcing air through tight ducts.

Should the basement suite have its own ductless system?

In most cases it’s the simplest route. A ductless mini-split gives the suite separate heating, cooling and a thermostat the tenant controls, without new ducts through a finished ceiling. We size it from the suite’s own heat loss and place the outdoor unit with the main house in mind.

Do I have to remove my furnace to install a heat pump?

No. Most installs here keep the gas furnace as backup in a dual-fuel system. The heat pump’s coil sits on the furnace and uses its blower, and the controls choose which one runs. If the furnace is past 15 years or needs a major part, pricing a replacement at the same time can save a second installation.

How long does heat pump installation in North York take?

It depends on the system. Replacing a central air conditioner with a ducted heat pump is close to an AC swap in scope. A ductless system with several heads, duct changes or electrical work takes longer, and a large custom home with two systems longer again. We give you the expected timeline with the quote.

Is a heat pump a good fit for a big house in Bayview Village or York Mills?

Yes, when it’s planned as part of the whole system. Big open homes often need two heat pumps, one per floor, or a heat pump paired with a modulating furnace. We run the heat-loss numbers floor by floor and look at zoning first, so the upper level doesn’t overheat in summer or run cool in January.

Who can I call for heat pump installation in Willowdale or Newtonbrook?

Call the local number on this page or send the request form. We book the home visit in a two-hour arrival window, text you when the technician is on the way, measure for the heat-loss calculation and check the ducts and panel. We cover all of North York, plus Richmond Hill, Vaughan and Markham next door.

Can we get a heat pump rebate if the house heats with natural gas?

Possibly. The Home Renovation Savings Program is the rebate open now, and what it offers can differ with the way a home is heated, gas included. The heat pump must also be on the program’s eligible list. We check the model and your situation against the current terms before you buy.

Book a visit

Need heat pump installation in North York? We’ll call you back to book.

Send the form or call. You’ll get a confirmed arrival window and a price before any work starts.

(647) 584-3959

Open 24/7, with technicians out day or night for no-heat and no-cooling emergencies

Get an installation quote

Tell us about your home. We’ll call to book a quote visit.

What do you need?
How soon? Optional
Add an email or detailsOptional

Or call (647) 584-3959Used only to book your visit. Privacy