Skip to content
Gas furnace and water heater in a home basement
Assurance HVAC Heating & Cooling, serving Aurora

Furnace repair in Aurora

(647) 692-0819Open 24/7, day or night

Assurance HVAC Heating & Cooling handles furnace repair in Aurora on all major brands, with technicians across town, from Aurora Heights and Aurora Highlands to the Bayview communities and the Hills of St Andrew. A TSSA-certified gas technician finds the part that failed and prices the fix before touching it. If it’s the middle of the night in Aurora, go straight to emergency furnace repair.

Request a technician

Tell us what’s going on. We’ll call to confirm a time.

What do you need?
How soon? Optional
Add email, details or text updatesOptional

Or call (647) 692-0819Used only to book your visit. Privacy

Key takeaways

  • Furnace repair across Aurora on all major brands, by TSSA-certified gas technicians.
  • You get one flat-rate price after the diagnosis, and nothing is fixed until you approve it.
  • Technicians are WSIB covered and insured, and every repair has a written warranty.
  • No-heat calls are answered 24/7. Booked repairs come with a two-hour window and a text.
  • Send a request or call the main line to book a technician in Aurora.

Last updated . Written and reviewed by the Assurance HVAC Heating & Cooling service team.

On this page
  1. Furnace repair in Aurora: signs you need a technician
  2. Furnace not working? Checks to make before you call
  3. The parts that fail most often in a gas furnace
  4. Why the heat exchanger matters on an older furnace
  5. Furnace repair in Aurora’s older homes and heritage streets
  6. Repairs in newer Aurora homes, townhouses and condominiums
  7. What happens on a furnace repair visit
  8. Repair or replace a furnace in Aurora?
  9. Furnace repair in Aurora: what affects the cost
  10. Which furnace brands do you repair in Aurora?
  11. Gas smell or carbon monoxide alarm: what to do
  12. Keeping your Aurora furnace out of the repair queue
  13. Furnace repair questions from Aurora homeowners

Furnace repair in Aurora: signs you need a technician

Book furnace repair in Aurora when the house can’t hold the thermostat setting, the burners light and shut off again, or the furnace makes a sound it didn’t make last winter. Most of these early signs trace back to one worn part, and catching it early usually keeps the repair small.

  • Cold air from the vents while the blower is running
  • Burners that start, then cut out after a few seconds
  • A whine, rattle or squeal when the furnace starts up
  • Some rooms staying cold while others overheat
  • A blinking status light, or water pooling near the base
  • A furnace that runs constantly or cycles every few minutes

A yellow, lazy flame or soot around the cabinet is different. Shut the furnace off and call, because it can point to poor combustion.

Furnace not working? Checks to make before you call

In Aurora, as anywhere, a few checks take minutes and don’t require opening the furnace: the thermostat, the filter, the service switch and breaker, and the outdoor vent pipes. Any one of them can stop a healthy furnace, so it’s worth ruling them out before you book a visit.

  • Thermostat: set to Heat, a few degrees above room temperature, fan on Auto. A blank screen usually means dead batteries.
  • Filter: if you can’t see light through it, replace it. A clogged filter overheats the furnace and trips the limit switch.
  • Power: the service switch on or near the furnace, which looks like a light switch, and its breaker in the panel.
  • Vents: on a high-efficiency furnace, clear snow or ice from the vent pipe ends outside by hand.
  • Condensate: a high-efficiency furnace in Aurora can shut down if its drain line is blocked.

Leave the cabinet closed. In any Aurora house, if a status light is blinking, note the pattern before cutting power, since switching the power off can clear the code.

The parts that fail most often in a gas furnace

Furnaces fail in a fairly predictable order, starting with the parts that heat up and cool down on every cycle. We follow the start-up sequence step by step so the part we replace is the one that stopped the heat, not the easiest one to guess.

Common furnace parts, how they fail and what you notice
PartHow it failsWhat you notice
Hot surface igniterCracks or weakens after thousands of cyclesFurnace clicks or hums but never lights
Flame sensorCoats with residue and stops sensing flameBurners light, then shut off after a few seconds
Inducer motorBearings wear or the motor overheatsWhine, rattle or no start-up at all
Pressure switchSticks, or the hose or vent clogsFurnace won’t begin the burner sequence
Limit switchTrips from poor airflow or fails itselfFurnace shuts off when hot, or cycles quickly
Blower motorECM motors fail, or capacitors weaken on older onesWeak airflow, or heat but no air movement
Control boardRelays burn out or a power surge hits itFurnace is dead or shows fault codes
Condensate trapClogs with debris or scaleWater on the floor, or a shutdown

Many of these are fixed that visit when the part is on the truck, and the diagnosis tells us which one you have. That’s what separates good furnace repair in Aurora from guesswork: the failed part gets replaced, not the one that happens to be in the van.

Why the heat exchanger matters on an older furnace

The heat exchanger is the metal chamber that keeps combustion gases away from the air your family breathes. A crack is a safety problem, not just a repair, and it’s the one finding that moves the conversation from repair to replacement.

A technician checks it when a repair or tune-up calls for it. If it’s sound, you carry on with the smaller repair. If it isn’t, we show you what we found and explain your options, including the price of both.

Furnace repair in Aurora’s older homes and heritage streets

Northeast Old Aurora is a heritage conservation district of late 19th and early 20th century houses. In any house that old, the heating equipment, ducts and venting may have been changed several times, which can mean awkward duct runs, tight equipment spaces and venting adapted over the years.

When we repair a furnace in a house like that, we look at the whole path: the vent, the ducts that reach the farthest rooms and how air returns. A furnace that struggles to heat a distant room is sometimes a duct problem, not a furnace problem.

Repairs in newer Aurora homes, townhouses and condominiums

Development spread east toward Highway 404 in the early 21st century, and newer streets west of Leslie Street added detached homes, townhouses and condominium apartments in the late 2010s. Newer furnaces tend to be high-efficiency models, which rely on plastic vent pipes, a condensate drain and a more complex control board.

Those features bring their own faults, such as blocked drains, frozen vent terminations and sensor errors. If your system is still under a manufacturer warranty, tell us before we start, because the way a repair is documented can matter for a warranty claim.

What happens on a furnace repair visit

A repair visit follows the same steps every time: we listen to what you’ve noticed, run the furnace through its start-up sequence, find the failed part and give you a flat-rate price before we do anything else. Nothing is repaired until you say yes.

  • You send a request or call, and we book a two-hour arrival window.
  • You get a text when the technician is on the way.
  • The technician checks the filter, venting, gas supply, safeties and, where the repair calls for it, the heat exchanger.
  • You approve one flat-rate price, then the repair starts.
  • The system is tested, and the work comes with a written workmanship warranty.

Repair or replace a furnace in Aurora?

Repair is usually right when the furnace is mid-life and the failed part is small. Replacement is usually right when a gas furnace is 15 to 20 years old and needs a major component, or has a cracked heat exchanger. We give you both prices and say which we’d pick.

When repairing makes sense and when replacing is better
SituationUsually better to
Furnace under 12 years old with a failed igniter or flame sensorRepair
Furnace over 15 years old needing an inducer motor or control boardCompare repair and replacement
Cracked heat exchanger at any ageReplace
A repair every winter for the last few yearsReplace
Furnace and AC both near the end of their livesReplace as a matched set

If replacement is on the table, our guide to furnace installation in Aurora explains sizing and efficiency.

Furnace repair in Aurora: what affects the cost

The cost of furnace repair in Aurora depends on which part failed, how hard it is to reach and whether the repair can be finished in one visit. We don’t guess at a number over the phone. After the diagnosis you get a flat-rate price, and that’s what you pay.

What changes the price of a furnace repair
FactorWhy it matters
The part itselfAn igniter and a control board are very different parts, and so are their prices.
AccessA furnace in a tight space takes longer to open up and service.
Age and availabilityOlder models can need parts that take longer to source.
One visit or twoHard-to-find parts mean a second trip.

Which furnace brands do you repair in Aurora?

We service all major brands, and as an HVAC contractor in Aurora we diagnose every one the same way. Furnaces share the same basic parts and start-up sequence, so a technician who understands how one works can diagnose another, and we work from the model’s own wiring diagram and fault-code chart.

Gas smell or carbon monoxide alarm: what to do

If you smell gas, leave the house at once, don’t touch switches or flames, and call Enbridge Gas at 1-866-763-5427 from outside. If a carbon monoxide alarm sounds, get everyone out and call 911. Don’t re-enter until you’ve been told it’s safe.

Ontario requires carbon monoxide alarms next to each sleeping area and, since January 1, 2026, on every storey of a home with a fuel-burning appliance, a fireplace or an attached garage, so a gas furnace means you need working ones. The Ontario carbon monoxide safety page (opens in a new tab) explains where to place them.

Keeping your Aurora furnace out of the repair queue

A fall tune-up cleans the burners and flame sensor, tests the safeties and checks gas pressure, which is exactly where many repairs begin. Ontario doesn’t require yearly furnace maintenance by law, but many manufacturer warranties ask for proof of it, so check your paperwork.

Our maintenance plan is open to Aurora homeowners and includes a furnace tune-up in the fall, an AC tune-up in the spring and priority booking. Between visits, change the filter on schedule and keep vent pipes clear of snow.

FAQ

Furnace repair questions from Aurora homeowners

What makes a furnace blow cold air?

The most common causes are a flame sensor that has stopped sensing flame, a clogged filter that tripped the limit switch, or a thermostat set to On instead of Auto. Check those first. If the burners keep shutting off, a technician should clean or replace the sensor and look at airflow.

My furnace won’t turn on. What should I check?

Confirm the thermostat is on Heat and above room temperature, replace its batteries, and check the furnace’s service switch and the breaker. Make sure the furnace’s front panel is fully closed, since a door safety switch stops most furnaces from running without it. If it still won’t start, a failed igniter or control board is likely.

How do I get furnace repair in Aurora?

Assurance HVAC Heating & Cooling provides furnace repair in Aurora with technicians who come to your home. Send the request form or call the main line, and we’ll book a two-hour arrival window. If you have no heat, say so, because no-heat calls go ahead of routine work. We cover Aurora Village, Aurora Estates, Aurora Grove and Bayview Wellington along with the rest of town. Homes just north are covered by furnace repair in Newmarket.

Do you repair furnaces in Northeast Old Aurora?

Yes. Houses in the heritage district date from the late 19th and early 20th centuries, so we look at vent routes, duct paths and equipment space as part of the repair. We explain what we find before you approve any price, whatever the age of the house.

Can you tell me the cost of a furnace repair before it starts?

It depends on the part, how accessible it is and whether we can finish in one visit. We don’t quote a number before diagnosing, because guesses are often wrong. After the diagnosis you receive one flat-rate price, and the work starts only after you approve it.

Is a 20-year-old furnace worth repairing?

It can be, if the heat exchanger is sound and the repair is small, like an igniter or flame sensor. A control board or inducer motor on a furnace that age often makes replacement the better value. We price both options and tell you which one we’d choose.

Do you repair high-efficiency condensing furnaces?

Yes, along with mid-efficiency models. Condensing furnaces add a condensate trap and drain, plastic venting and more sensors, so we check those as part of the diagnosis. Blocked drains and frozen vent terminations are common reasons for a shutdown in winter.

Does a repair come with a warranty?

Yes. Every repair carries a written workmanship warranty, and the price you approve before work is the price you pay. Parts may also carry their own manufacturer coverage, so keep your paperwork with your records in case you need to make a claim.

Book a visit

Need furnace repair in Aurora? We’ll call you back to book.

Send the form or call. You’ll get a confirmed arrival window and a price before any work starts.

(647) 692-0819

Open 24/7, with technicians out day or night for no-heat and no-cooling emergencies

Request a technician

Tell us what’s going on. We’ll call to confirm a time.

What do you need?
How soon? Optional
Add an email or detailsOptional

Or call (647) 692-0819Used only to book your visit. Privacy