Skip to content
Gas furnace and water heater in a home basement
Assurance HVAC Heating & Cooling of Richmond Hill

Furnace repair in Richmond Hill

(647) 905-9241Open 24/7, day or night

Assurance HVAC Heating & Cooling of Richmond Hill handles furnace repair in Richmond Hill on all major brands, from builder-installed furnaces in Westbrook and Rouge Woods two-storeys to compact units in Langstaff townhomes. So much of the city went up between the 1980s and the 2000s that many furnaces here have reached 15 to 20 years, which is when igniters, inducer motors and control boards tend to wear out. A TSSA-certified gas technician finds the failed part and prices the fix before touching it. Here’s more on how we work as an HVAC contractor in Richmond Hill.

Request a technician

Tell us what’s going on. We’ll call to confirm a time.

What do you need?
How soon? Optional
Add email, details or text updatesOptional

Or call (647) 905-9241Used only to book your visit. Privacy

Key takeaways

  • Furnace repair across Richmond Hill, from Oak Ridges to Langstaff, on all major brands.
  • Repairs are done by TSSA-certified gas technicians with WSIB coverage and full insurance.
  • After the diagnosis you get one flat-rate price, and nothing is fixed until you approve it.
  • No-heat calls are answered 24/7. Booked repairs come with a two-hour window and a heads-up text.
  • Every repair carries a written workmanship warranty. Send the form or call the local line.

Last updated . Written and reviewed by the Assurance HVAC Heating & Cooling of Richmond Hill service team.

On this page
  1. Furnace repair in Richmond Hill: signs to book now
  2. Why so many Richmond Hill furnaces need repairs now
  3. Furnace not working? Quick checks for Richmond Hill homeowners
  4. The worn parts we find in older Richmond Hill furnaces
  5. High-efficiency furnace repair: vents, drains and snow
  6. Booking furnace repair in Richmond Hill, step by step
  7. Repairs in Richmond Hill basements and townhome closets
  8. What affects the cost of furnace repair in Richmond Hill?
  9. Repair or replace a 15 to 20 year old furnace?
  10. Gas smells, CO alarms and cracked heat exchangers
  11. Gas furnace repair for all major brands
  12. No heat in a cold snap? Emergency furnace repair in Richmond Hill
  13. Keeping your furnace out of trouble
  14. Furnace repair in Richmond Hill neighbourhoods and nearby
  15. Furnace repair questions from Richmond Hill homeowners

Furnace repair in Richmond Hill: signs to book now

Call for furnace repair in Richmond Hill once the house can’t hold the thermostat setting, the furnace fires in short bursts, or it makes a sound it didn’t make last winter. On a furnace 15 years or older, these early signs usually trace back to one worn part, and catching it early tends to mean a smaller repair.

  • The furnace blowing cold air while the blower runs
  • Burners that light, then cut out after a few seconds
  • A whine or rattle from the inducer motor at start-up
  • Upstairs bedrooms falling well behind the main floor
  • A blinking status light, or water under the cabinet

A yellow, floppy flame or soot around the furnace is different: shut it off and call, since it can mean poor combustion.

Why so many Richmond Hill furnaces need repairs now

Richmond Hill grew fast from the 1980s into the 2000s, so furnaces on the same street often went in within a few years of each other and now wear out on a similar schedule. In Devonsleigh, Doncrest and Westbrook, plenty of two-storey family homes run a furnace that is 15 to 20 years old.

Most worn parts are one-visit fixes. The bigger question at this age is the heat exchanger, which we look at on every repair visit, because a crack changes the advice.

Furnace not working? Quick checks for Richmond Hill homeowners

Basic furnace troubleshooting covers a few things you can check in minutes without opening the furnace: the thermostat, the filter, the service switch and breaker, and the outdoor vent pipes. Any of them can stop a healthy furnace. If the heat still doesn’t come back once you’ve checked them, book a technician.

  • Thermostat: on Heat, a few degrees above the room, fan on Auto. A blank screen usually means flat batteries.
  • Filter: if no light shows through it, replace it. A clogged one overheats the furnace and trips the limit switch.
  • Power: the furnace’s service switch, which looks like a light switch on or near it, and its breaker in the electrical panel.
  • Outdoor vents: on a high-efficiency furnace, clear snow or ice from the vent pipe ends by hand.

Leave the furnace cabinet closed. If a blinking status light shows through its small viewing window, note the pattern before switching the power off, since cutting power can clear it.

The worn parts we find in older Richmond Hill furnaces

On a furnace that has been running since the 2000s, parts tend to fail in a familiar order, starting with the ones that heat up and cool down every cycle. We follow the start-up sequence step by step, so the part we replace is the one that actually stopped the heat, not the easiest one to guess.

Parts that wear out on older furnaces, and the signs
PartHow age wears it downWhat you notice
Hot surface igniterYears of heating up and cooling down leave hairline cracksThe inducer starts, but the burners never light
Flame sensorCombustion residue slowly coats the rodBurners light, then drop out within seconds
Inducer motorBearings dry out after many wintersA whine or rattle as the furnace starts
Pressure switch and hosesHoses crack, and the vent or trap they sense can clogBurners won’t light, with a fault code
Limit switchTrips more often as filters and blowers lose airflowHeat comes in short bursts while the fan keeps going
Blower motor or capacitorCapacitors weaken and older motor bearings wearA hum, a slow start or no air at the registers
Control boardRelays wear and connections loosen with heatNo response to the thermostat, or a stalled start-up

On furnaces with a variable-speed ECM blower, the motor’s electronic module can sometimes be replaced without changing the whole motor.

High-efficiency furnace repair: vents, drains and snow

High-efficiency furnace repair is often about water and venting rather than a broken part. A condensing furnace, rated 90% AFUE or higher, cools its exhaust until water forms, drains that water and vents through plastic pipe. When either path is blocked, a safety switch shuts the furnace down.

In Richmond Hill, newer homes such as many in Jefferson and around Oak Ridges are likely to have plastic vent pipes, usually two, leaving a side wall. Drifting snow or a pile from clearing the driveway can bury them, so brush the ends clear by hand. Inside, we flush the trap and check the drain line and any condensate pump.

Older houses near Mill Pond may still have a mid-efficiency furnace venting into a metal chimney, where we check the draft instead.

Booking furnace repair in Richmond Hill, step by step

Send the form or call, and someone from our team calls back to set a two-hour arrival window. The technician texts on the way, diagnoses the furnace and quotes one flat-rate price for the repair. Nothing is touched until you approve, and most repairs are finished that visit when the part is on the truck.

  • Tell us the brand, rough age, symptom and any blinking code.
  • You hear the diagnostic fee before the visit is booked.
  • The technician tests the start-up sequence, gas pressure, venting, airflow and heat exchanger.
  • After the repair, full heating cycles confirm the safety controls respond.

The Technical Standards and Safety Authority (opens in a new tab) regulates gas work in Ontario, and only G2 or G1 certified technicians work on your furnace.

Repairs in Richmond Hill basements and townhome closets

Where the furnace sits affects the repair. Two-storey homes in Rouge Woods, Westbrook and Bayview Hill often have finished basements with the furnace boxed into a small utility room, while townhomes and condos along Yonge Street and near Langstaff tuck a compact furnace or fan coil into a closet. Clearing about a metre in front of the unit before the visit helps.

What affects the cost of furnace repair in Richmond Hill?

Furnace repair cost comes down to the part that failed, the brand and age of the furnace, whether the technician carries that part and how hard the unit is to get at. Two furnaces with the same symptom can need different parts, so we quote after diagnosis. You hear the diagnostic fee first, then approve one flat repair price.

What changes the price of a furnace repair
FactorHow it affects the price
The failed partA flame sensor cleaning is a small job. A new inducer, ECM module or circuit board means more parts and labour.
Brand and ageSome brands use proprietary parts, and a 20-year-old model’s parts can be slow to source.
Stocked or orderedCommon parts travel on the truck. If one must be ordered, that means a second trip, and you’re told up front.
AccessA boxed-in basement furnace or a closet install adds labour time.
A second faultA tripped pressure switch may trace back to a blocked drain or vent that needs clearing too.

The price you approve doesn’t change, even if the job runs long.

Repair or replace a 15 to 20 year old furnace?

A single worn part on a furnace younger than about 15 years is almost always worth repairing. Past 15 to 20 years, replacement deserves a look when the furnace needs a major part, has needed a technician several winters running, or has a cracked heat exchanger. On a Richmond Hill furnace that age, we price both options side by side.

How we weigh repairing against replacing an older furnace
QuestionPoints to repairPoints to replacement
AgeYounger than about 1515 to 20 years, or past it
What failedAn igniter, sensor, capacitor or switchThe heat exchanger, or a major part on an old unit
Repair historyFirst call in yearsA call every winter lately
The ACStill has years leftSame age, so one installation covers both

When replacement wins, our page on furnace installation in Richmond Hill explains sizing and efficiency.

Gas smells, CO alarms and cracked heat exchangers

Treat a gas smell or a carbon monoxide alarm as a safety issue before a repair. For gas, get out without using switches, flames or your phone indoors and call Enbridge Gas at 1-866-763-5427 once you’re outside. For a CO alarm, get everyone, pets included, outside and call 911. We repair the furnace after the home is safe.

A cracked heat exchanger can leak carbon monoxide into the air the blower moves, so that furnace stays off. Under Ontario law, a Richmond Hill home with a fuel-burning appliance such as a gas furnace, a fireplace or an attached garage needs working CO alarms next to each sleeping area and, since January 1, 2026, on every storey.

Gas furnace repair for all major brands

We handle gas furnace repair on all the major brands in Richmond Hill homes, including Carrier, Lennox, Goodman, Trane, Napoleon, Rheem, York, Amana, Bryant and Daikin. A builder-grade single-stage furnace gets the same careful diagnosis as a modulating one.

No heat in a cold snap? Emergency furnace repair in Richmond Hill

If the house has no heat in cold weather, don’t wait for a regular booking. We’re open 24/7, no-heat calls go to the front of the line, ahead of routine work, and a technician comes out day or night. Read our emergency furnace repair page for what to check and how to keep the house safe until the technician arrives.

Keeping your furnace out of trouble

Most breakdowns on this page begin as gradual wear: residue on the flame sensor, hairline cracks in an igniter, sludge in the condensate trap. A fall furnace maintenance visit cleans and tests those parts before the Richmond Hill heating season starts, so a worn part gets replaced on your schedule.

Ontario doesn’t make yearly furnace service mandatory, but many manufacturer warranties want to see maintenance records, so read yours. Our maintenance plan books two tune-ups a year and adds priority booking.

Furnace repair in Richmond Hill neighbourhoods and nearby

Our technicians repair furnaces in every part of Richmond Hill: Oak Ridges, Jefferson, North Richvale, Richvale, Mill Pond, Crosby, Bayview Hill, Westbrook, Rouge Woods, Devonsleigh, Doncrest and Langstaff. We also cover nearby Markham, Vaughan and North York.

FAQ

Furnace repair questions from Richmond Hill homeowners

Our furnace came with our Rouge Woods house. How much life is left?

Look for the manufacture date on the rating plate or in the serial number, which often includes it. If the plate is behind the burner door, leave it for the technician. Gas furnaces typically last 15 to 20 years. In that range, one worn part can still be worth fixing, and we show the replacement price beside the repair so you can weigh both.

Can you repair a furnace in a Richmond Hill condo or townhome?

Yes. Townhomes and condos near Langstaff and along Yonge Street often use a compact furnace or a fan coil in a closet, and we repair both. Building management may have rules about trades working on in-suite equipment, so we ask a few questions when you book. Clear the closet beforehand so the technician has room to work.

Why does my furnace shut off a few seconds after the burners light?

When the burners light and go out within seconds, the control board usually can’t confirm the flame. A flame sensor coated with residue is the most likely cause, and a technician can usually clean it on the spot. A poor ground or a cracked sensor can do the same. If it keeps happening after one restart, book a visit.

Do you charge to diagnose a furnace in Richmond Hill?

Yes. A diagnosis has a flat fee, and you’ll hear the amount on the phone before the visit is booked. Once the technician has found the fault, you get a flat-rate price for the repair itself, and nothing goes ahead until you say yes. That repair price holds even if the job takes longer than planned.

Can I keep running a furnace that’s short cycling?

It will usually keep heating, but don’t ignore it. Short cycling, where the furnace runs a few minutes and shuts off, often comes from a clogged filter, overheating that trips the limit switch, a furnace too big for the house or a thermostat in a warm spot. Start with a fresh filter. If the pattern continues, have it checked, since every extra start wears the igniter and motors.

Is a cracked heat exchanger always a replacement?

On a furnace that’s 15 years or older, almost always. The heat exchanger separates the flame from the air your family breathes, and replacing it means taking much of the furnace apart, so the labour often makes a new furnace the better value. On a younger furnace the part may still be under the manufacturer’s warranty, so we check that first.

How long does a typical furnace repair take?

An igniter, flame sensor or capacitor is a short job, and most repairs finish in one visit when the part is on the truck. Motors, control boards and gas valves take longer because of the testing that follows. If an older model needs a part ordered, you hear that before approving anything.

How do I book furnace repair in Richmond Hill?

Use the number or request form on this page, which reaches our Richmond Hill line. We cover every neighbourhood from Oak Ridges and Jefferson to Doncrest and Langstaff, plus nearby Markham, Vaughan and North York. We call back to set up a two-hour arrival window, and every furnace repair in Richmond Hill gets a flat-rate price before work starts.

Book a visit

Need furnace repair in Richmond Hill? We’ll call you back to book.

Send the form or call. You’ll get a confirmed arrival window and a price before any work starts.

(647) 905-9241

Open 24/7, with technicians out day or night for no-heat and no-cooling emergencies

Request a technician

Tell us what’s going on. We’ll call to confirm a time.

What do you need?
How soon? Optional
Add an email or detailsOptional

Or call (647) 905-9241Used only to book your visit. Privacy