
Tankless water heaters in Richmond Hill
(647) 905-9241Open 24/7, day or night
A tankless heater heats water only when you open a tap, so there is no tank to run out. Assurance HVAC Heating & Cooling of Richmond Hill installs and services tankless water heaters in Richmond Hill, sized for your household’s flow and winter water temperature, with TSSA-certified gas technicians and a flat-rate price you approve first. Weighing it against a tank? See water heater installation in Richmond Hill.
Key takeaways
- Gas and electric tankless heaters sized by flow and temperature rise, not guesswork.
- Winter inlet water is colder in Ontario, so sizing matters more than the label suggests.
- TSSA-certified gas technicians handle the gas line, venting and permits the job needs.
- A flat-rate price you approve before work starts, and a written workmanship warranty.
- Yearly descaling and service keep a tankless heater running for about 20 years.
Last updated . Written and reviewed by the Assurance HVAC Heating & Cooling of Richmond Hill service team.
On this page
- Tankless water heaters in Richmond Hill: hot water only when a tap is open
- Sizing tankless water heaters in Richmond Hill by flow
- Why Ontario winters matter for tankless sizing
- Condensing or non-condensing tankless heaters
- What changes when you convert from a tank
- Electric tankless heaters and the electrical panel
- Combi boilers where the home has hydronic heat
- Tank or tankless: how they compare
- Tankless heaters in Bayview Hill, Westbrook and Jefferson homes
- Wall-mounted units for condos and townhomes near Langstaff
- Tankless installation day, step by step
- Scale, filters and the yearly service
- Tankless faults worth a service call
- What affects the price of tankless water heaters in Richmond Hill
- Tankless water heaters questions from Richmond Hill homeowners
Tankless water heaters in Richmond Hill: hot water only when a tap is open
A tankless water heater in a Richmond Hill home heats water on demand. When you open a tap, flow starts, a burner or electric element fires, and the heat exchanger warms the water as it passes through. When you close the tap, the heater shuts off, so it does not keep a tank of water hot all day.
The limit is flow. Each heater can warm only so many litres a minute to a given temperature, so the number of fixtures that can run at once depends on the unit and on how cold the incoming water is. That is why sizing is the most important decision.
Sizing tankless water heaters in Richmond Hill by flow
A tankless heater in Richmond Hill is sized by two numbers: how much hot water you want at once, and how much the water has to be heated. The heating needed is the temperature rise, the gap between the cold water coming in and the temperature at the tap.
To size one, we add up the fixtures that realistically run together, such as a shower and the dishwasher, and apply the rise for your house. A family in a four-bathroom Bayview Hill home needs a different heater from a couple in a Langstaff townhome, and we ask before we recommend a model.
Why Ontario winters matter for tankless sizing
Water entering a Richmond Hill house in an Ontario winter is much colder than in summer, so the heater has to add more heat to reach the same temperature. A unit that handles two showers in August may struggle with the same two in February.
Sizing for the coldest month is the safe approach, and that is how we do it in Richmond Hill. Otherwise the heater delivers lukewarm water when you use several fixtures at once in the depths of winter, and that is the usual complaint about a unit that was sized too small.
Condensing or non-condensing tankless heaters
A condensing tankless heater in Richmond Hill captures extra heat from its exhaust, so it runs more efficiently than a non-condensing one, and it vents through plastic pipe because the exhaust is cool. A non-condensing unit is simpler and often uses stainless steel venting.
| Consider | Condensing | Non-condensing |
|---|---|---|
| Efficiency | Higher, recovers heat from exhaust | Lower |
| Venting | PVC or polypropylene, as the maker specifies | Stainless steel, as the maker specifies |
| Condensate | Needs a drain, and often a neutralizer | Usually none |
| Upfront cost | Higher | Lower |
| Running cost | Lower over time | Higher over time |
ENERGY STAR Canada (opens in a new tab) lists how certified models compare.
What changes when you convert from a tank
Converting a Richmond Hill home from a tank to a tankless heater is more than swapping boxes. A tankless burner uses a lot of gas at once, so the gas line often has to be larger, and the venting is different from a tank’s.
We check the gas meter capacity and the pipe size, the vent route, the combustion air and the condensate drain, and the water lines too. A tank’s old natural-draft vent may no longer be right. We explain each change and what it adds to the price before you approve anything. If you smell gas at any point, step outside before using a phone and call Enbridge Gas at 1-866-763-5427, and if a carbon monoxide alarm sounds, get everyone outside and call 911.
Electric tankless heaters and the electrical panel
Electric tankless heaters have no burner or vent, but in Richmond Hill they often need a large amount of electrical capacity. Many homes need a new breaker or heavier wiring, and some panels cannot carry the load at all.
We check the panel, the available capacity and the wire run before we quote. In some Richmond Hill homes an electric unit makes sense for a single bathroom or a small suite, while the main house is better served by a gas tankless or a tank.
Combi boilers where the home has hydronic heat
A combi boiler is an alternative in Richmond Hill where a home already heats with hot water, because one unit heats the house and the taps. It is a boiler decision, not a water heater one, and it only suits homes with hydronic heat.
Some custom homes in Richvale and Bayview Hill use a boiler for in-floor heat, and some older homes heat with radiators. If that is your home, see boiler installation in Richmond Hill for combi and indirect-tank options. Most forced-air homes will be better off with a standalone tankless heater.
Tank or tankless: how they compare
A tankless heater suits Richmond Hill households that want to free up floor space and are willing to pay more upfront for a longer life. A tank suits those who want a lower purchase price and a simpler installation.
| Consider | Tank | Tankless |
|---|---|---|
| Space | Large floor footprint | Compact, often wall-mounted |
| Lifespan | About 8 to 12 years | About 20 years |
| Upfront cost | Lower | Higher, with extra gas, venting or electrical work |
| Hot water limits | Runs out when the tank is used up | Limited by flow, not by volume |
| Standby heat | Keeps the tank hot all day | Heats only on demand |
| Maintenance | Flushing, anode rod | Yearly descaling and filter cleaning |
We price a tank beside any tankless quote so you can compare the two honestly.
Tankless heaters in Bayview Hill, Westbrook and Jefferson homes
Larger two-storey homes in Bayview Hill and Oak Ridges, with several bathrooms and a busy morning routine, are where a tankless heater is most often considered. Much of Richmond Hill was built from the 1980s through the 2000s, and the original tank in many of those homes is on its second or third replacement.
Two-storey homes in Westbrook, Rouge Woods, Doncrest and Devonsleigh, often with finished basements, can free mechanical-room space with a wall-mounted unit. If your tank is already a power-vent model, its side-wall vent location may help, though the new vent must be what the tankless maker specifies.
Wall-mounted units for condos and townhomes near Langstaff
In condos along Yonge Street and townhomes near Langstaff, space is tight, and a compact wall-mounted tankless heater can free up a closet. The limits are venting, gas supply and building rules, and some buildings restrict what can be installed.
We ask about the building, the vent route and any condo requirements when you book, so we know what is possible before we arrive. In some suites an electric unit is simpler than gas, and in others the existing arrangement leaves no room for either.
Tankless installation day, step by step
A tankless installation in Richmond Hill is a bigger job than a like-for-like tank swap, and we do not promise a finish time. When you book, we confirm a two-hour arrival window and text you when the technician is on the way.
The crew shuts off the water and gas, removes the old heater, mounts the new one, connects gas, water, venting and condensate, then fires the unit and tests the safeties. They set the temperature, check flow at your fixtures and walk you through the settings. We handle the permits and inspections the job needs.
Scale, filters and the yearly service
Hard water is common across the GTA, including Richmond Hill, and scale is the main enemy of a tankless heater. It builds up on the heat exchanger, cuts flow and temperature, and eventually causes errors or failure.
A yearly service flushes the heat exchanger with a descaling solution, cleans the inlet filter, checks the burner, the venting and the condensate drain, and tests the safety controls. Our maintenance plan includes priority booking, and many manufacturer warranties ask for proof of regular service.
Tankless faults worth a service call
Tankless faults in Richmond Hill usually come down to scale, flame failure, a blocked vent or an inlet filter that is clogged. Common signs are lukewarm water, a unit that shuts off mid-shower, an error display or a heater that will not fire.
We cover these in detail on our page for water heater repair in Richmond Hill. If the heat exchanger is badly scaled or damaged, we explain whether repair or replacement is the better spend. Our HVAC contractor in Richmond Hill page lists the rest of our work.
What affects the price of tankless water heaters in Richmond Hill
The price of a tankless heater in Richmond Hill depends on the model, how much work the conversion needs and what the house already has. We quote a flat-rate price after a site visit, and you approve it before any work starts.
| What affects it | Why it matters |
|---|---|
| Capacity | Set by flow and temperature rise for your household |
| Condensing or not | Condensing models cost more and run more efficiently |
| Gas line | A larger pipe or a longer run adds work |
| Venting | A new vent route or a condensate drain adds parts |
| Electrical | An electric unit may need a new breaker or heavier wiring |
| Extras | Isolation valves for descaling, a recirculation line, a water softener |
Tankless water heaters questions from Richmond Hill homeowners
What lifespan can we expect from a tankless unit?
In Richmond Hill, about 20 years with regular maintenance, compared with 8 to 12 years for a tank. The main factor is scale from hard water, which is common in the GTA, so yearly descaling matters. We tell you plainly how long a given model is likely to last and what it needs to get there.
Will a tankless heater give us endless hot water?
Not quite. A tankless heater in Richmond Hill never runs out the way a tank does, but its flow is limited. If too many fixtures run at once, or the winter water is very cold, the water may turn lukewarm. Correct sizing by flow and temperature rise is how we avoid that.
Do we need a bigger gas line for a tankless heater?
Often, yes, in Richmond Hill as elsewhere. A tankless burner uses a large amount of gas all at once, and the existing line for a tank may be too small. We check the gas meter capacity and the pipe size on the site visit, and tell you what any change adds before you approve the work.
Can an electric tankless heater work in our home?
Sometimes. Electric units need a large amount of electrical capacity, and many homes would need a new breaker or heavier wiring, while some panels cannot carry the load. We check the panel before quoting. They suit a small suite or one bathroom better than a whole busy house.
Do you install tankless water heaters in Oak Ridges and Jefferson?
Yes. Tankless water heaters in Richmond Hill are a service we offer across the whole city, including Oak Ridges, Jefferson, Bayview Hill, Mill Pond, Richvale, Crosby and Langstaff. Send a request and we call back to book a two-hour arrival window, then text you when the technician is on the way.
Is tankless worth it for a small household?
It can be in Richmond Hill, mostly for the compact size, the long lifespan and the lack of standby heat. The higher upfront cost and extra gas or venting work may take a long time to pay back for a small household. We price a tank beside the tankless quote so you can compare.
Why does my tankless heater need descaling?
Minerals in the water settle on the heat exchanger as it heats, and the layer cuts flow and temperature over time. Hard water is common across the GTA. A yearly flush with a descaling solution, and a clean inlet filter, keep the heater efficient and help prevent errors and early failure.
Should I rent or buy a tankless water heater?
That depends on your agreement and your plans, and we cannot comment on any rental contract. Read it for buyout, repair and removal terms, then ask us for a flat-rate price to buy and install. Comparing both side by side is the honest way to decide.
Need tankless water heaters in Richmond Hill? We’ll call you back to book.
Send the form or call. You’ll get a confirmed arrival window and a price before any work starts.
Open 24/7, with technicians out day or night for no-heat and no-cooling emergencies
