Skip to content
Water heater tank in an unfinished basement
Assurance HVAC Heating & Cooling of Richmond Hill

Water heater repair in Richmond Hill

(647) 905-9241Open 24/7, day or night

A cold shower on a school morning is the kind of problem that cannot wait. Assurance HVAC Heating & Cooling of Richmond Hill provides water heater repair in Richmond Hill for gas and electric tanks, power-vent units and tankless heaters, with TSSA-certified gas technicians and a flat-rate price you approve first. If your tank is leaking or very old, see water heater installation in Richmond Hill.

Request a technician

Tell us what’s going on. We’ll call to confirm a time.

What do you need?
How soon? Optional
Add email, details or text updatesOptional

Or call (647) 905-9241Used only to book your visit. Privacy

Key takeaways

  • Repairs for gas, electric, power-vent and tankless water heaters across Richmond Hill.
  • We tell you whether a repair is worth it, or whether the tank has reached the end.
  • Gas work by TSSA-certified technicians, WSIB covered and insured, with a written workmanship warranty.
  • A flat-rate price you approve before work starts, with common parts on the truck.
  • No-hot-water calls are answered 24/7, and a leaking tank body means replacement.

Last updated . Written and reviewed by the Assurance HVAC Heating & Cooling of Richmond Hill service team.

On this page
  1. Water heater repair in Richmond Hill: signs of trouble
  2. Safe checks before water heater repair in Richmond Hill
  3. No hot water or not enough: what is usually behind it
  4. Common water heater repairs
  5. Rumbling, popping and sediment in the tank
  6. Leaks: what can be repaired and what cannot
  7. Power-vent heaters in newer Richmond Hill subdivisions
  8. Tankless faults in brief
  9. Water too hot? Temperature and scald safety
  10. Relief valve discharge, gas smell and carbon monoxide
  11. Water heater repair in Richmond Hill or a new tank?
  12. From Bayview Hill and Westbrook to Mill Pond and Langstaff
  13. What a visit looks like and what affects the price of repair
  14. Water heater repair questions from Richmond Hill homeowners

Water heater repair in Richmond Hill: signs of trouble

The first signs of a failing water heater in a Richmond Hill home are usually changes in how the hot water behaves, such as running out sooner, taking longer to heat or coming out too hot. Sounds, smells and water on the floor follow, and each one points toward a different fault.

  • No hot water, or hot water that runs out much faster than before
  • Water that is too hot, or that swings between hot and cold
  • Rusty, cloudy or smelly hot water
  • Rumbling, popping or banging from the tank
  • Water at the base of the tank or around the fittings
  • A pilot or burner that will not stay lit, or a loud power vent fan

Safe checks before water heater repair in Richmond Hill

A few checks are safe for any Richmond Hill homeowner and rule out the simplest causes. Do not open panels or take apart gas parts, and stop if anything smells like gas.

  • Gas heaters: confirm the gas valve to the heater is on and other gas appliances work
  • Pilot models: relight only as the label on the tank describes, and not if you smell gas
  • Electric heaters: check that the breaker has not tripped
  • Check that the cold water valve on top of the tank is open
  • Look around the base of the tank for water, and note where it comes from

If you smell gas, leave the house and call Enbridge Gas at 1-866-763-5427 from outside. Details are on the Enbridge Gas safety page (opens in a new tab).

No hot water or not enough: what is usually behind it

On a gas tank, no hot water often means a thermocouple, flame sensor, igniter or gas control valve problem. On an electric tank it is more often a failed element or thermostat. Running short of hot water can also mean a broken dip tube or heavy sediment.

In a Richmond Hill family home, where showers, laundry and the dishwasher can run in the same hour, a tank that is slowly losing capacity is easy to miss until it quits. We test the parts in order and replace only what has failed.

Common water heater repairs

Most water heater repairs in Richmond Hill involve a small number of parts, and many can be done in one visit. Our technicians carry common parts so a repair does not have to wait for an order, although a model-specific part sometimes does.

Water heater parts that commonly need repair
PartWhat goes wrongWhat you notice
Thermocouple or flame sensorWeakens or gets dirtyPilot or burner will not stay lit
IgniterWears outBurner will not light
Gas control valveFails to open or regulateNo flame or erratic temperature
Power vent blower and pressure switchMotor or switch failsLoud fan, or the heater will not fire
Anode rodCorrodes awayRusty or smelly water, a shorter tank life
Dip tubeCracks or breaksLukewarm water, runs out quickly
Electric element or thermostatBurns out or failsNo hot water, or not enough
Temperature and pressure relief valveSticks or leaksWater discharging at the outlet pipe

Rumbling, popping and sediment in the tank

A tank in Richmond Hill that rumbles or pops is usually full of sediment, with minerals from the water settling at the bottom and trapping heat under them. The noise is steam bubbles forcing their way through the layer, and it makes the tank work harder and wear faster.

Flushing the tank can help if the sediment is recent. On an older tank the layer may be hard and thick, and flushing may not clear it. We explain what we find and tell you honestly whether a flush will make a difference or whether replacement is the better spend.

Leaks: what can be repaired and what cannot

In Richmond Hill, as anywhere, a leak at a fitting, a valve or the relief valve can usually be repaired. A leak from the body of the tank cannot, because the steel liner has corroded through, and the tank needs to be replaced.

If you find water at the base, close the cold water valve on top of the tank, switch off the gas or power, and call. Where the water comes from decides the answer, and we tell you straight. If replacement is the answer, we explain how a new tank goes in and what to expect.

Power-vent heaters in newer Richmond Hill subdivisions

A power-vent water heater uses a fan to push exhaust out through plastic pipe, and you may find one in newer homes in Jefferson and Oak Ridges. That fan, its pressure switch and the vent run add parts that can fail.

Typical calls are a loud or rattling blower, an error light and a heater that will not fire. We check the blower, the pressure switch, the vent for blockage and the condensate path where there is one. A blocked vent termination after heavy snow is worth checking.

Tankless faults in brief

A tankless heater in Richmond Hill can fail in different ways, and the common ones are scale on the heat exchanger, flame failure and venting problems. Scale builds up where the water is hard, which is common across the GTA, and it cuts flow and temperature.

Descaling, cleaning the inlet filter and checking the venting resolve many calls. Our page on tankless water heaters in Richmond Hill goes into maintenance and sizing in more detail.

Water too hot? Temperature and scald safety

Water heaters are commonly set around 49°C at the tap to prevent scalds, and water much hotter than that can burn skin quickly in any Richmond Hill home. If your water seems too hot, a failed thermostat or gas control may be the cause, and it is worth a call.

Richmond Hill households with young children or older adults are the ones to watch most closely. Lowering the setpoint is a sensible step, though a very low setting on a storage tank is a different concern. We can set it correctly and check that the thermostat is working.

Relief valve discharge, gas smell and carbon monoxide

A relief valve that discharges water, a smell of gas or a sounding carbon monoxide alarm are safety problems in a Richmond Hill home, not routine repairs. Treat them seriously and act before you call anyone.

  • Water pouring from the relief valve outlet: turn off the gas or power and call us right away
  • A smell of gas: leave the house without using switches, then call Enbridge Gas from outside
  • A carbon monoxide alarm sounding: get everyone outside and call 911
  • Soot, a yellow flame or scorch marks near the heater: switch it off and call

See the Ontario carbon monoxide safety page (opens in a new tab) for alarm placement.

Water heater repair in Richmond Hill or a new tank?

A tank water heater in Richmond Hill lasts about 8 to 12 years, so age is the first question. A part on a younger tank is usually worth fixing, while a tank near the end of its life or leaking from the body is not.

When to repair a water heater and when to replace it
ConsiderRepair is reasonableReplacement is smarter
Age of tankUnder about 8 yearsPast 10 years, or 8 to 12 years with problems
FaultThermocouple, igniter, element or valveLeaking tank body, heavy corrosion
WaterClear and hotRusty hot water from the tank itself
RepairsFirst repair in yearsA second or third repair in a short time
TanklessDescaling or a flame or vent faultHeat exchanger damage beyond repair

If you rent your tank, check your agreement for who pays for repairs before you call. We do not know the terms of any rental contract.

From Bayview Hill and Westbrook to Mill Pond and Langstaff

Much of Richmond Hill was built from the 1980s through the 2000s, so many tanks in Bayview Hill, Westbrook, Rouge Woods, Doncrest and Devonsleigh have been replaced once already, and some are on their second or third. The age on the label is worth checking.

Mill Pond and Richvale have older houses where the water heater may sit in a tight corner, and condos and townhomes near Langstaff and along Yonge Street often use compact units. Access and venting differ, and we plan the repair around the space.

What a visit looks like and what affects the price of repair

When you book in Richmond Hill, a real person calls back to confirm a two-hour arrival window, and you get a text when the technician is on the way. After the diagnosis you see a flat-rate price, and the work starts once you approve it.

The price of water heater repair in Richmond Hill depends on the part that failed, whether it is on the truck, the type of heater, how easy it is to reach and whether the fault points to replacement. Our maintenance plan covers regular care, and our HVAC contractor in Richmond Hill page lists the other work we do.

FAQ

Water heater repair questions from Richmond Hill homeowners

Why is there no hot water from my gas water heater?

In Richmond Hill homes the usual causes are a pilot that has gone out, a failed thermocouple or flame sensor, a faulty igniter or a gas control valve problem. Check that the gas supply is on, and if you smell gas, leave and call Enbridge Gas. Otherwise, a technician can test the parts and give a flat-rate price.

Water is pooling under our tank. Is repair possible?

It depends on the source, in Richmond Hill as anywhere. A leaking fitting, valve or relief valve can usually be repaired. Water coming from the body of the tank means the liner has corroded and the tank needs replacement. Close the cold water valve on top, switch off the gas or power and call us.

What is the rumbling and popping coming from our tank?

Almost always sediment, which builds up faster where the water is hard, as it commonly is across the GTA. Minerals settle at the bottom of the tank, trap heat and make steam bubbles that rumble and pop. A flush can help if caught early, while on an older tank the sediment may be too hard. We tell you honestly whether flushing or replacing is the better choice.

Is it worth repairing a 10-year-old tank?

Sometimes. Tank water heaters last about 8 to 12 years, so a small repair like a thermocouple or element may still be reasonable. A leaking tank, rusty hot water or a second repair soon after the first usually points to replacement. We give you both numbers and say which we would choose.

Do you repair water heaters in Oak Ridges and Jefferson?

Yes. Water heater repair in Richmond Hill covers the whole city, including Oak Ridges, Jefferson, Bayview Hill, Mill Pond, Richvale, Crosby, Langstaff and Doncrest. Send a request and we call back to book a two-hour arrival window, then text you when the technician is on the way.

What temperature should I set my water heater to?

Water heaters are commonly set around 49°C at the tap to help prevent scalds, which matters most with children or older adults in the house. A technician can check that the thermostat and gas control are working and set the temperature properly for your household.

Do you fix tankless heaters as well as tanks?

Yes, across Richmond Hill. The common faults are scale on the heat exchanger, flame failure and venting problems. Descaling and cleaning the inlet filter solve many calls, since hard water is common in the GTA. If the heat exchanger is badly damaged, we explain whether replacement makes more sense than repair.

I rent my water heater. Who repairs it?

That depends on your rental agreement, which we have not seen and cannot comment on. Read it for who handles repairs and what a buyout involves, then call us if you own the heater or want a second opinion on whether to repair or replace. You will see a flat-rate price first.

Book a visit

Need water heater repair in Richmond Hill? We’ll call you back to book.

Send the form or call. You’ll get a confirmed arrival window and a price before any work starts.

(647) 905-9241

Open 24/7, with technicians out day or night for no-heat and no-cooling emergencies

Request a technician

Tell us what’s going on. We’ll call to confirm a time.

What do you need?
How soon? Optional
Add an email or detailsOptional

Or call (647) 905-9241Used only to book your visit. Privacy